Engine/Transmission/Maintenance
14,249
Total Topics
25
Showing
37
Page 37 of 570
Topics in Engine/Transmission/Maintenance •
newest topics first
After you read all the threads on beams. Look into V6 swaps.
After you read all the threads on beams. Look into V6 swaps....
Finished it today. Took me 6 hours, but Ehh its done. Thanks for the help guys!...
Camshafts
Never heard of kent cams before? After checking out their website, they don't actually make cams for the 3S, only the 4A-GE Corolla & MR2 (A...
Hey everyone, I want to wake up my 2.2 GT.
Just so you know:
I don't know if my mechanic has the mental capacity to do a red top swap, nor do I have t...
Do you have an after market muffler or is it stock?
Is there a resonator in the exhaust still?
Sometimes itll sound brutal without a cat or resonator....
All 5SFE heads have the spot for the distributor and the bolt holes for it as well. The only different thing is that they DON'T come with one, because...
Does anyone have some pics of a st202 gearbox with transfer case? Im trying to compare something here....
?? Do you mean the air intake temperature sensor that goes into the filter box? If so place it as close as you can to the filter, may have to extend...
ooooooooh ya
after im done with this it will be a cooling power house! ill post pics when i purchase it and start the install.
Thank you for the infor...
I bought a used one here for 15 or 20 bucks when mine went out and it hasn't given me any issues....
I have seen several solutions, and i figured out a simple one for my liking, if you have access to a welder.
I used grade 8 nuts. These nuts are spot...
Check the powersteering pump brackets, they were loose on mine and it would vibrate over 3000 rpm...
Any idea what size those bolts are? I know the head size is 10mm, the shank looks to be something like 5 or 6mm. Not sure what the thread size is thou...
I think NGK is what most people run that's what I got, you can mostly by those nice blue wires haha....
QUOTE (valerit1 @ May 14, 2014 - 12:50 PM)
Which solvent would be safe and efficient to spray inside the distributor to clean up from oil (temporaril...
Good luck finding the seal or a rebuild kit. Youre probably going to have to dissassembly the distributor and pull out the seal, then take it to a par...
3SGE Beams
RHD 7afe (just saying...)
This post has been edited by
BonzaiCelica
: Jan 7, 2017 - 4:44 PM...
^He also said that 318 lift is for the rev1 cams only. Rev2-3 he only does 330 or the 345. So I'm guessing the one presure2 did is the 330 cam? Still ...
Ah so much fun to be had there.
Really, its just taking things off 1 by 1, and then taking all the bolts from the housing. Try not to wreck the spline...
does anyone know where to get a 3sge rev 3 overhaul gasket kit? my dealership is quoting me 464 usd shipped to the us....
Confirmed. Dextron 3 / dexron 3 works in the celica st automatic transmissions!...
Hmm. Is there anyway I can make it fit, maybe taking the part from my beams exhaust header that gets bolted on the cylinderhead and change it with the...
^That. I've only done it with non-hardened valve seats, but it's an easy and fairly goof-proof thing to do yourself. Then send it out to be tanked a...
Do you have any pics of your set up profile pics are old. And don't do any justice to your car...
depending on your shopping skills, a V6 can be cheaper than a BEAMS...