Suspension/Handling/Braking
5,114
Total Topics
25
Showing
4
Page 4 of 205
Topics in Suspension/Handling/Braking •
newest topics first
Get it aligned correctly and then see how it is....
Ah yep, my 00 up here in salt country needed many hours of cutting torch time to get it all apart because the OE bushing steel sleeves had cold welded...
Can someone help me figure out what tire size would best fit on some wheels I'm wanting to buy.
Look at this on eBay
http://www.ebay.com/itm/331956880...
Can some body tell me wether Avensis Bosch calipers will fit the St202?
I know they bolt straight onto a Gen7 but is it the same for the gen6?...
Hi all,
Some beginner questions on brake caliper guide-pin bushings. Last when I replaced my brake pads I noticed my guide-pin rubber bushings were l...
dont mess with anything in the high 30s and up.
and if you plan to run flush I suggest dont look at the charts that are listed here. none of them wer...
615ks r great but they were so fast, and terrible, the z2s r much better and cheaper, but best tire right now is the new potenza re71r or something li...
But DO NOT use the same 'copper grease' on any parts in contact with rubber!!! Use only silicone greases on those parts or brake slide pin specific gr...
Hi guys I have a creaking noise coming thru from the bottom of my driver floor pan. Feels like something squishy/creaky.
I have a TRD coilovers (hi/lo...
Got a UK '96 ST202 3S-GE.
Just wondering what the correct thickness for OEM rear brake pads are?
I've bought a set of pads (Apec PAD777) which accordi...
I can see you just recently joined but please use the search for things like this. There are so many threads covering this
http://www.6gc.net/forums/i...
Bought my seals from Toyota, made my own pistons from stainless steel....
Ah sorry I should've said, its a gt4 st205.
Just had a quick look and I can't see any stop tech disks for mine...
45 won't be the greatest offset - it'll look fairly sunken in without any spacers. I'd recommend at least 17x8 ET35 because you'll get a moderately fl...
Basically if your going for looks cheap coilovers, performance Koni lowering springs. You don't see people track cheap coilovers for a reason. On the ...
hmmm that is an odd issue. Something went awry with the spring or perch methinks. Yeah I agree that it might need to be popped off for further inspect...
Assuming the original studs didn't stretch out the holes too much, option one may work they're only barely off. 0.03mm is approx 0.001" and being that...
Are you talking about the bar that will connect the top of the rear strut mounts?
Like these
http://www.6gc.net/forums/index.php?showto...ear+strut+br...
Does anyone know the camber spec for a 1997 Celica ST in the rear? My rear camber was set too far in and now my inner rear walls are completely shot....
Brake shoes simply had too much meat on them - nothing else was wrong other than that. Specs said that the e-brake shoes need replacing with there is ...
Hey guys,
I can't remember if the rear control arms (the two pairs coming from the subframe - not the trailing arms) from the vert are compatible with...
6gc people are too cheap to buy air.
I think there were are couple people back in the early 2000's that had it on their show cars...
Ah yea, reboxed parts. Love that. Order two ball joints and get one that's a Moog in a non Moog box and the other is some wimpy looking crap with no g...
First off I need to replace my Celica's suspension it's old, worn, and blowen up. I love handing and driving dynamics but I have a modest budget. The ...
Brembo rotor part numbers:
Front: W0133-1818688 (25425)
Rear: W0133-1833479 (25162)
Toyota part numbers:
Front : 43512-20630
Rear: 42431-20330...