DG Performance and Top Shelf Racing are coming together to produce a mid pipe for 6th gen 3SGTE conversions.
This would allow you to use, or not use your existing cat and would bolt up like a normal stock exhaust.
We plan on using a 2.5" mid pipe or maybe even a 3"
this would include the flanges and of course the flex pipe... we are looking at $250 - $275 for the 2.5 and a little more for the 3
we can also get this coated if you guys want.
Let me know what you guys think
-Mikemjcoury@gmail.comTeam Reynolds StyleCelica BlogCelica WikiIt will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.
if i ever come up with the funds to do that swap i would buy one.
Forgive me but what does a midpipe do?
The 3s midpipe doesnt line up correctly with the stock exhaust, i had to do some custom welding so im assuming this will eliminate the need for welding.
This post has been edited by Supersprynt: Mar 15, 2004 - 11:12 PM
MyFlickrMyeBay_Perpetual Aperture_
If it's 3" and it doesn't hit my cross member every time my engine shakes a little, I'M DOWN.
I'd be interested in the coated... also I'm willing to pay extra to put a high flow cat in there (damn emissions and helps act like a resonator on these wide open exhausts).
- aba
This post has been edited by abatardi: Mar 16, 2004 - 2:13 AM
-Mikemjcoury@gmail.comTeam Reynolds StyleCelica BlogCelica WikiIt will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.
I have to go all custom, so I wouldnt need it...
-qatar11+Mar 16, 2004 - 7:04 AM
-abatardi+Mar 16, 2004 - 10:40 PM
lol that's cool.
Are you having one of these made for yourself? The reason I ask is that if others aren't interested, and you're willing to build 2 of the pipes I'd split the cost with (because I'm assuming it's more to build the first pipe). Let me know.
Otherwise I am buying an Aussie st185 pipe and hoping it will fit.
- Aaron
250, hmm you can have a custom 3 inch mandrel done for 100 bucks where i live.
-Four+Mar 17, 2004 - 1:15 PM
-Mikemjcoury@gmail.comTeam Reynolds StyleCelica BlogCelica WikiIt will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.
-qatar11+Mar 17, 2004 - 10:19 PM
intresting, but non the less my friend had one on his MR2T for 100 and the quoted the same to do mine.
Well.... then....****....
maybe its hot products?
-Mikemjcoury@gmail.comTeam Reynolds StyleCelica BlogCelica WikiIt will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work.
LoL Mike I say you just make like two and do the rest on demand.
Most likely he didn't mean the midpipe included...must be catback or something for 100 which is still a good deal.
95 Toyota Celica GTDead for now --> Soon to have a 3S-GTE02 WRX --> This is for speed- Borla Exhaust- TurboXS BOV- Custom CAI02 Civic EX- MB Quart Reference 5.25" Components- Rockford MTX 8" Subs in the doors- Alpine Type S Rear Fills- 2x Alpine SWR-1042D Subs in a custom fiberglass box- Alpine F345 Amp for the front doors- Alpine M605 on each Type R- Phoenix Gold wiring- Alpine CDA-9855 Head Unit- Alpine Amp link- 2x Rockford Fosgate 1 Farad Caps- The best Viper 791 alarm install ever
-snadman+Mar 19, 2004 - 10:39 PM
how much would the 2.5 inch flexi be on its own? do you have any pics?
GT4 ST205 79 modifications and rising!!spec list:http://sox-japoc.co.uk/forum/garage.php?mo..._vehicle&CID=10
qatar is this going anywhere?
- aba
