i want to to and ignition upgrade and i was looking at some msd parts and the crane hi-6 , my Queston is where do i get a cap to run an exteral coil , do i have to modify the stock on or what
ignition system upgrade - 6G Celicas Forums
look i had the msd ignition system and let me tell u one thing IT DOES NOT DO A DAMN DIFFERNCE! dont waste ure money and go buying that ignition systems they dont work.
if you use MSD... you'll need the following:
coil tower power, PN 8803 (for your cap to run external ignitor)
an aftermarket ignitor (blater 2 always works, PN 8202 with bracket PN 8213
a tach adapter (use PN 8910 eis)
and an ignition box
but unless you're going to run boost or nos, you don't need it... the stock toyota stuff is pretty potent
coil tower power, PN 8803 (for your cap to run external ignitor)
an aftermarket ignitor (blater 2 always works, PN 8202 with bracket PN 8213
a tach adapter (use PN 8910 eis)
and an ignition box
but unless you're going to run boost or nos, you don't need it... the stock toyota stuff is pretty potent
pointless...
MyFlickrMyeBay_Perpetual Aperture_
Why upgrade the ignition on car that won't benefit from it?
95 Toyota Celica GTDead for now --> Soon to have a 3S-GTE02 WRX --> This is for speed- Borla Exhaust- TurboXS BOV- Custom CAI02 Civic EX- MB Quart Reference 5.25" Components- Rockford MTX 8" Subs in the doors- Alpine Type S Rear Fills- 2x Alpine SWR-1042D Subs in a custom fiberglass box- Alpine F345 Amp for the front doors- Alpine M605 on each Type R- Phoenix Gold wiring- Alpine CDA-9855 Head Unit- Alpine Amp link- 2x Rockford Fosgate 1 Farad Caps- The best Viper 791 alarm install ever
i am turboing for sure , might run low boost this summer and i am for sur pulling motor this winter or at least after the show season that way it doesnt matter how long it takes me to do the internals so i can safey run alot more boost just wanted to know so i can start getting parts together