I searched the forum and got a few things with links that aren't working. i need the pinout of the ecu for the 5sfe. im installing gen 1 safc and i need to know which wires are which (power, grnd, rpm signal, and air flow)

thanks

http://www.toyotacelicaonline.com/celica1/safc.htm >>

No that one does not WORK. Trust me I posted like a mad man trying to figure it out. It does NOT tell you that the brown ground wire has to placed closer to the ECU than the black*hrmm* or vice versa, Also does NOT give the knock sensor pin. Just got to Apex-i.com download the japanese language pack for Adobe get both the wiring diagram and Instucions. Dont use that site as shown above download the pack, theres a 5sfe's in there (it didnt come in the manual you have) with easy to read pin-outs and instructions.....The black/brown ground is the difference between "Check Engine Light" and a properlly working SAFC >>

But you have Gen1 Im N/M im speaking of Gen2, hahaha. Take warning all others who do get one/

This post has been edited by 5sfeTurbo: May 5, 2004 - 11:04 PM

I tired all of this, still cannot find it on apexi's web site. i just need to know which wires are the rpm grnd pwr and air flow. can someone please maybe post a pinout or email it to dblcltchr18@hotmail.com

I added a router to my computer so the IP# got changed. Here is the new link to the diagrams.

5S-FE engine wiring link

This post has been edited by Outsider: Oct 5, 2005 - 1:49 PM

Thanks everyone. its all installed, now just got to get it tuned.

right?