koni had front and rear shocks and struts for 94-97 but they skipped out on the 98-99's. question is will they fit my 98 GT.. or would custom fabrication be needed. if fabracation is needed, then how would i go about doing it. thanks in advance to all who reply~ holla
Team 6gc 2oo5
All they are are just inserts into the strut housing. All that has to be done is remove the stock struts and put the koni's in there place and then reinstall the whole shock/strut housing.
Bryan
well...mostly true. remove the front stock inserts, install the new inserts. remove the rear strut assembly. cut the top of the rear strut assembly, drill the center of the bottom of the assembly. blah blah blah (only blah blah, because can't remember exact steps). install new insert, bolt it in, install the strut assembly. and drive away!
