Im just wondering what you guys use for aftermarket spark plugs and spark plug wires. If anyone can tell me what kind and where you got it, and also if theres any difference between aftermarket and stock, let me know. Thanks a bunch! >>

I've always used ngk plugs for toyotas i've owned. Don't go with bosch platinum.

I have Magnecor 8.5mm wires and Denso Iridium plugs. Got them both from a vendor I sued to work for, beacuse I could get them cheap.
Copper plugs are generally what I recommend if you need new ones. I know a lot of people on 6gc have NGK wires, I used to have a set on my '95... No problems; I upgraded after using them for 5 years due to the boots being burnt through.

-95STHATCH+May 26, 2004 - 2:09 AM

trd and denso irid work great for swaps.. it helped XST.

This post has been edited by Mr7AFE: May 26, 2004 - 12:58 PM

custom length Accel wires (one coil wire already melted internally from the MSD) with NGK plugs on the ae92

whatever was on the car wires (good shape) and NGK plugs on the aw11

where to get NGK wires?? Cheapest place?

Denso Iridium Plugs are probably the best.

http://www.sparkplugs.com/default.asp

Probably get them for a good price there, and some Magnecore wires

I'm using customized Split Fire wires with HKS iridium S40i plugs.... so.. so...
didn't notice any change much from the stock wires.