NEVERSTOP

#1

which color wire do I have to splice into on the air/fuel sensor for the 5sfe??

Thanks
NEVERSTOP

---

99 project version 3.0.. hello SEMA 2010 =)

Unknown User

#2

The wire from your O2 Sensor below the Header. On my ST, they were both gray, we hooked up the power and ground then tapped both till 1 of the 2 worked. -shrug

celicaracer18

#3

does anyone know the answer to this for a mr2 3sgte

---

My RX8 2JZ Swap ThreadLink to PicsStatusLow.com,Store,Facebook

NEVERSTOP

#4

I ended up hooking it up to the air/fuel sensor, I spliced into the black wire with the red strip ( I think... will have to double check) and that seems to work fine.. will find out for sure tomorrow which wire it is

---

99 project version 3.0.. hello SEMA 2010 =)

Supersprynt

#5

A/F meter is not a good way to judge ur mixture, not w/o wideband...it really only tells u ur o2 sensor is working.

This post has been edited by Supersprynt: Jun 11, 2004 - 11:55 PM

---

MyFlickrMyeBay_Perpetual Aperture_

NEVERSTOP

#6

---

99 project version 3.0.. hello SEMA 2010 =)

politicsareevil

#7

I have the same question for the ST I have a air fuel gauge. I just tried to install it but the only way I can get it to work is by unpulgging the sensor to the ecu. I know I did this wrong help me out guys.