I will post a pic tomorrow. It is just a plain black bar that connects the 2 strut towers. nothing special with looks
my st205 swapandour Beams swap
my st205 swapandour Beams swap
I need a front strut tower bar - 6G Celicas Forums
my st205 swapandour Beams swap
Like I said before, I seen were someone had a Toyota Matrix front strut tower bar moddified and put on the rear of a celica. I'd like to know how much moddifying neads to be done to make it fit, or if it's even possable.
Live Free, Be Happy
they got the ring verson of the matrix rear bar. and cut off most of the ring and re-drilling a hole to fit the celica.
i'm still interested if a neon rear would work.
i'm still interested if a neon rear would work.
I used a camary one for my rear... fit damn good but did have to cut away some of the ring so it only mounts on two bolts and had to bend the angle a little on the part where the ring mounts to the bar... also had to drill a new hole, think it took about 20mins to get it to work
as for the front - TRD strut tower bar kicksa$$! hehe
as for the front - TRD strut tower bar kicksa$$! hehe
99 project version 3.0.. hello SEMA 2010 =)
-NEVERSTOP+Nov 16, 2004 - 11:39 PM
You got a pic of it?
QUOTE(NEVERSTOP @ Nov 16, 2004 - 11:39 PM)
I used a camary one for my rear... fit damn good but did have to cut away some of the ring so it only mounts on two bolts and had to bend the angle a little on the part where the ring mounts to the bar... also had to drill a new hole, think it took about 20mins to get it to work
as for the front - TRD strut tower bar kicksa$$! hehe
[right][snapback]207985[/snapback][/right]
as for the front - TRD strut tower bar kicksa$$! hehe
[right][snapback]207985[/snapback][/right]
You got a pic of it?
Live Free, Be Happy
i've ordered the Jspeed front and rear strut braces. cost me $570 with shipping.. >
> and it haven't arrive yet...
> and it haven't arrive yet...
Turbo install made possible thanks toTeamJ.D.M.officially 5SFTE junior member~*MuH NeW RiDe*~
my own was 7.99+shipping =$20.35 off ebay holds fine my hood had a little gap but after it worked it self in! check my profile
This post has been edited by Punch: Nov 25, 2004 - 1:04 PM
99 project version 3.0.. hello SEMA 2010 =)
My GT Four rear brace will be in Monday. I'll take a photo as soon as I can.
I just ordered the GT-4 rear brace and a front neon brace. I'll try to get ahold of a camera so I can show everyone. I really nead to get some pictures on here.
Live Free, Be Happy
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...ssPageName=WD1V
This is the one I got. I haven't seen anyone with this one, I hope it will fit.
This is the one I got. I haven't seen anyone with this one, I hope it will fit.
Live Free, Be Happy
thats looks nice^
My Neon front strut bar arrived Saturday. It looks like I will have to drill at least two new holes. What's the easiest way to mark where to drill the holes? Also, anyone know the size of drill bit I'll need to make the holes the correct size?
This post has been edited by keefer37: Dec 20, 2004 - 11:16 AM
This post has been edited by keefer37: Dec 20, 2004 - 11:16 AM
-keefer37+Dec 20, 2004 - 12:15 PM
I made a template for mine. I think that's the easiest way to do so. Attach the template to the bottom where it's flat against the steel, then proceed to drill your holes.
I had a friend take it to his company and precision drilled the holes. The 2 holes that needed to be redrilled I made a 7/16 th diameter. Template fit perfectly.
QUOTE(keefer37 @ Dec 20, 2004 - 12:15 PM)
What's the easiest way to mark where to drill the holes? Also, anyone know the size of drill bit I'll need to make the holes the correct size?
I made a template for mine. I think that's the easiest way to do so. Attach the template to the bottom where it's flat against the steel, then proceed to drill your holes.
I had a friend take it to his company and precision drilled the holes. The 2 holes that needed to be redrilled I made a 7/16 th diameter. Template fit perfectly.
im gonna order the rear bar, next week..thats gonna screw up my audi system though. i know its gonna be in the way of my box.
neon rear won't work
yup, i know for a fact the neon rear does not work..
This post has been edited by Hanyo: Dec 26, 2004 - 7:06 PM
This post has been edited by Hanyo: Dec 26, 2004 - 7:06 PM
I still haven't had the chance to drill holes in my Neon front strut tower bar. I've got the drill bit I need, but need to get the right bits for my torque wrench. I need to figure out the size and then also the correct torque for when I put it on. Anyone know these off the top of their heads?
i dont think that there is a correct torque that the strut bar needs to be put on. (correct me if im wrong) when i installed my springs with my friend (toyota mechanic) we just put it on really tight.