Well it has started to slow down at work and I now have time to work on the car. I have started to work on the wiring harness. Here are a few pics.

(click on pictures for full size)



(Donor harness, 1997 corolla)

This post has been edited by Outsider: Sep 20, 2009 - 8:52 PM

did you get just the engine or a front clip.. and were from?

no clip, just the engine, uncut harness and ECU (which I have to now source out as the seller lost the ECU) I am looking into getting the C-One Power ECU.

Power ECU link

I bought it locally from a guy here in town. I was talking to Mario at Toysport and they have 2 right now that they are gonna put on sale(deep discount) just to move the stock.

This post has been edited by Outsider: Jul 3, 2004 - 7:34 PM

so sweet! Good luck with the conversion!

good luck man.

Well, here is a bit more work done.Slow but steady. Keep in mind that I HAVE NO BEAMS DIAGRAMS.

The wire bundle that goes to the firewall has been re-routed to come out the other side of the motor.







The rat's nest.
Many of the wires are now longer than needed and will be trimmed after test fitting the harness.


I also gave myself a minor annoyance. I muxed up 3 of the injector plugs. Now I have some more fun to deal with, which is which? I have been told that this motor has sequential injection (not sure). Just my luck.


This post has been edited by Outsider: Sep 20, 2009 - 9:15 PM