OK, I just bought some Infinity Kappa 6.5 components. It came with a cross over that I mounted to the inside of the door panel. Now, since I am going to run the speakers off my amp (which is in the trunk) I need to get those wires from the door to the back of the car. I am stumped on how I can get the wires to the trunk with out any wire showing near the door hinges.. Any suggestions?
Front Speakers - 6G Celicas Forums
Nvm, I dunno if this was covered in there..
Take the door/footwell plastic piece off.
You should either see a wire trough, or a black plastic thing covering the wire trough that the carpet is stapled too. Lift that up and put wires underneath
This post has been edited by shid: Jul 11, 2004 - 12:41 AM
Take the door/footwell plastic piece off.
You should either see a wire trough, or a black plastic thing covering the wire trough that the carpet is stapled too. Lift that up and put wires underneath
This post has been edited by shid: Jul 11, 2004 - 12:41 AM
Nevermind! I totally figured everything out. I'll do it in the morning and take some snaps so people can have a visual!