I want to put a FMIC in this 3S-GTE.. What size is the best to buy for the install?
FMIC - 6G Celicas Forums
Ill prolly do a 25x5x3 for my ST-T.. Just to give you an idea??
this is what size is in mine 7afte i think it will work fine for a 3sgte i got it for $200
Core size: 30 X 6 X 2
Tanks: 2.125 wide X 7 high X 3.25 deep
Piping: 2.5 OD X .0625 wall X 2.25 long
There are eight cooling rows and eight fin rows on this intercooler.
The cooling rows on this intercooler are internally finned.
Core size: 30 X 6 X 2
Tanks: 2.125 wide X 7 high X 3.25 deep
Piping: 2.5 OD X .0625 wall X 2.25 long
There are eight cooling rows and eight fin rows on this intercooler.
The cooling rows on this intercooler are internally finned.
yea your 3sgte is cool but ill stick to my 7agte
Mine is the following.
Core: 21 x 9 x 3
End to End lenght : 31 inches
Inlet/outlet diameters: 2.5"
Performance:
- Supports more than 550 hp
- Flows up to 800 c.f.m.
- Leak tested at 30 psi
Construction:
- 100% Aluminum
- Tub & fin design
- Mounting brackets at bottom, and mounting nub at top for universal application
Warranty: Lifetime warranty against manufacturing defect
You can see a pic of it here.
Street Imports 21x9x3
Price = $300
Later on, i'm going to upgrade to their bigger intercooler which is 24 x 12 x 3
sphinx
This post has been edited by sphinx: Aug 6, 2004 - 4:52 PM
Core: 21 x 9 x 3
End to End lenght : 31 inches
Inlet/outlet diameters: 2.5"
Performance:
- Supports more than 550 hp
- Flows up to 800 c.f.m.
- Leak tested at 30 psi
Construction:
- 100% Aluminum
- Tub & fin design
- Mounting brackets at bottom, and mounting nub at top for universal application
Warranty: Lifetime warranty against manufacturing defect
You can see a pic of it here.
Street Imports 21x9x3
Price = $300
Later on, i'm going to upgrade to their bigger intercooler which is 24 x 12 x 3
sphinx
This post has been edited by sphinx: Aug 6, 2004 - 4:52 PM
-sphinx+Aug 6, 2004 - 2:50 PM
yea your 3sgte is cool but ill stick to my 7agte
i had some pic's , but i took them down cause i'm going to put new ones when i fix my car again.
I'm in the process of the finishing touches before i paint her. She's gonna have a new front and a lil extra goodies.
Here's an old pic of the car with the FMIC at a meet we had in LA.
The black celica next to the blue one
That's the FMIC there. It fits good on the car, and you have good clearance.
Right now, it's going though a major make over.
This post has been edited by sphinx: Aug 6, 2004 - 5:50 PM
I'm in the process of the finishing touches before i paint her. She's gonna have a new front and a lil extra goodies.
Here's an old pic of the car with the FMIC at a meet we had in LA.
The black celica next to the blue one
That's the FMIC there. It fits good on the car, and you have good clearance.
Right now, it's going though a major make over.
This post has been edited by sphinx: Aug 6, 2004 - 5:50 PM
I have the same one!Did you find you got turbo lag with that size of intercooler?
I have the same one as sphinx: 21x9x3
piping was done by DG_Performance...
piping was done by DG_Performance...
[color=#FF0000] I MISS MY RED BABY =(
My RX8 2JZ Swap ThreadLink to PicsStatusLow.com,Store,Facebook
check out my profile for my specs and pics.
15PSI - 30MPG - Megasquirt Tuned
hey spinx whose car is the silver 6th gen with the torn up gt4 front bumper?