There is a company called Race Engineering that has Wiseco pistons made for the 5SFE to help lower compression down to 8.5:1. This may be something to add to the 5SFE turbo sticky. On their website (http://www.raceeng.com) as part # XTP-532P875 and only $449
95 Toyota Celica GTDead for now --> Soon to have a 3S-GTE02 WRX --> This is for speed- Borla Exhaust- TurboXS BOV- Custom CAI02 Civic EX- MB Quart Reference 5.25" Components- Rockford MTX 8" Subs in the doors- Alpine Type S Rear Fills- 2x Alpine SWR-1042D Subs in a custom fiberglass box- Alpine F345 Amp for the front doors- Alpine M605 on each Type R- Phoenix Gold wiring- Alpine CDA-9855 Head Unit- Alpine Amp link- 2x Rockford Fosgate 1 Farad Caps- The best Viper 791 alarm install ever
i thought the stock compression was 8.5:1 but theses are stronger than stock ones.
stock on a 5S-FE is like 10.5 isn't it?
look here
Webpage both the st and gt are 9.5:1 according to henryvo site
This post has been edited by nik: Aug 20, 2004 - 12:21 PM
yea your 3sgte is cool but ill stick to my 7agte
Stock GT is 10.5 I believe; and these pistons are in the second turbo sticky.. which I'm still working on and haven't finished yet (since stickies are locked and non replyable)
-shid+Aug 20, 2004 - 5:22 PM
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
-Kwanza26+Aug 20, 2004 - 6:42 PM
i got most of my internals for the 3sgte from race eng
My RX8 2JZ Swap ThreadLink to PicsStatusLow.com,Store,Facebook
>