I am gettin some kind of clunking noise from my passanger side rear brake assembly. it comes and goes but if I push down the break pedal I get a quick clunking noise. It doesn't seem to make a difference if I am moving or not. I am also gettin a little bit of break release noise.

I have these parts installed:

russel stainless steel brake lines
Brembo cross/slotted rotors
CF composit brake pads

I have checked out the brakes now 3 times and I can't seem to find anything wrong with it. I have removed the calipar and inspected EVERYTHING and cleaned it all up and reapplied the silicone brake grease. I have aslo checked the swaybar so I know that not it either.

So if neone has ne ideas of what I might have wrong - PLEASE LET ME KNOW

thanks
NEVERSTOP

maybe its your sway bars

your clipers might be sticking... if they are then your going to have to take it apart sand it down and lube it up... (get your mind out of the gutter you sick basterds.) .. iyou might also want to check for and air pocket in your lines... if i think of anything eles ii'll let you know

did you make sure that the brake brackets are in place...the pad might be sliding around

ooops double sorry

This post has been edited by fastgt: Aug 25, 2004 - 4:37 PM

did you check the e-brake and make sure thats not sticking?


Oh, how did you get Brembos on the back?????

i have that same prob, so let me know how you fix it!

i have the same problem..except mine are oem brakes and only do it on random.

well I havent heard the sound in almost a week now.. so I dont know >>

I have this problem too. I did the conversion, so i just figured I screwed something up. I hope someone finds out what it is.

tommorrow I will be messing around with my brake system so I will try a few things and see if I can improve nething.. the sound has come back now so I gotta get it figured out.. have narrowed it down to the capliars

did u check your bearings ? it could be bent

-NEVERSTOP+Sep 7, 2004 - 10:31 AM