all i have to do is hook up my oil and coolant lines and i can drive , i know i need to hook into the lines under the throat body but theres three not two and does anydbot know what ones i use , and does anybody know what wire is the coil ground black/red or black/yellow
This post has been edited by pxcr440: Aug 30, 2004 - 4:59 PM
You can use any of the coolent lines. 2 are going to be cold and 1 is hot but all of them will work. ATM I cant remember what is the hot one tho. If/when I ever get the car back I'll look for you.
Member of Team 5sfTe
under the exhasut manifold there are to runners that go by the block. place two T pipes in them then.
stock. then with the t's.
I I
_______ __L__I___
_______ _____L___
i doubt that helped. but i tried lol.
as for the coil. take a picture or sumthing.
Visit My Automotive & Tech Blog.
i think the coil setup is different cause i have a 94
maybe i never thought of that.
Visit My Automotive & Tech Blog.
I will check my Mechanic book tomorrow...I have the one for our cars from Toyota and it has all that information in there. They have wiring guides for the 94-95 guys and 96-99 so I will tell you tomorrow. love ya
95 Toyota Celica GTDead for now --> Soon to have a 3S-GTE02 WRX --> This is for speed- Borla Exhaust- TurboXS BOV- Custom CAI02 Civic EX- MB Quart Reference 5.25" Components- Rockford MTX 8" Subs in the doors- Alpine Type S Rear Fills- 2x Alpine SWR-1042D Subs in a custom fiberglass box- Alpine F345 Amp for the front doors- Alpine M605 on each Type R- Phoenix Gold wiring- Alpine CDA-9855 Head Unit- Alpine Amp link- 2x Rockford Fosgate 1 Farad Caps- The best Viper 791 alarm install ever
