Im looking at buying Borbet Type T rims that are 16x9. I havent been able to find out what the offset is of the rim however i dont even know what offset I need for my front wheels to turn with that width.
any help would be great.
hows it taste motha f*cka
stock is 38mm i believe, so that should be fine. the offset is measured from the inside of the rim to the mounting plate so stock offset should be good, somebody needs to back me up on that though.
I WANT THOSE EXACT SAME RIMS!!!!!
goddamnit i thought I was going to be the first... damn...
tell us all how they fit
hows it taste motha f*cka
38 is not correct on 9" rims. I think that you may be looking at rolled fenders to get those to work. Search on the term "offset" for a thread started by Shid. I explained the whole deal in there.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
