I am about to install the front koni inserts, i know you have to cut the housing. But my question is How far down do you cut, or does it matter? (i would just normally remove the nut, But its ground down because of coil-over install)
Question for those who have install Koni's - 6G Celicas Forums
i am about to install my konis in like a week. ill try to find out.
FlickR2011 Subaru WRX and 1997 3sgte Celica
You don't have to cut anything to install the fronts; you will need to cut the housings on the rear struts only. I don't remember the exact amount, but Koni should supply instructions.
I have it done now, But the nut to remove the stock housing was ground down for the coil-over install, So i had to cut the housing.