Batman722

#1

How the F did you remove the one screw/nut from the inside of the fender on the top that is right next to the headlight ? >>

Is there a secret trick I just don't know about ? I am about to break out my hack saw >>

any help
thanks

---

my st205 swapandour Beams swap

mikew04

#2

You just need to get up there with a small wrench and work it back and forth. it takes time and its a bitch but thats the way to do it.

ROBWOZ1018

#3

Ha...I was trying to put on my projectors today and ran into this problem...Ended up quitting because it was getting dark and I couldnt find a 10mm wrench...It is a bitch I tell ya

aznxrussel

#4

oh man that screw is the worst...makes me mad jus thinking about that

Batman722

#5

I am going at it tomorrow. I just got a few extensions and I am going to try that first thing in the morn. >>

---

my st205 swapandour Beams swap

rjbibeau

#6

swivel dapter and a long extension and alot of patience

flipside97LTD

#7

The absolute best way is to use a rachet wrench. That's a regular wrench with a rachet it the crown area. It's still a pain but it gets it done fast.

rjbibeau

#8

you gotta fork out 60 bucks to craftsman if you want a set but well worth it.

SlowCelica94

#9

Sounds like that nut with the hex in the middle on our struts. I hate that fugger with a violent passion

---

NASA/SCCA RX-7....currently under the knife92 Civic hatch B16 - Sold10th anniv RX-7 - RIPThe Slow Celica - Sold...and then crushed crushed due to street racing.Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!"

Batman722

#10

I have done it. It is complete. I used about a foot of extensions and a swivel. I finally have my 97 bumper on and when it was off I took out my high beams and installed angel eyes >> now everything is wired and complete. I will have pics of the angel eyes tonight. The only problem is my clear turns will be delivered tomorrow

---

my st205 swapandour Beams swap

celicarocker

#11

-Batman722+Oct 6, 2004 - 12:32 PM