doGGy

#1

Well, here goes question, is 4A nad 7A head gaskets the same? Cuz im looking for 1.6mm head gasket for my Celi to reduce CR till 9.5 and the only thing i can find is 4A head gaskets in this diameter... Can some one confirm that they are the same? Cuz i heard rumors...


Thanks,
Romas

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

Kwanza26

#2

They are not the same because the water systems are slightly different between the two, but the gasket should work none-the-less...

---

"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...

doGGy

#3

So does the 4A gasket gonna fit the 7A or not how do you think? Cuz i found HKS 4A 1.6 mm head gasket for a good price and i want to get it...


-Kwanza26+Dec 16, 2004 - 9:46 AM

QUOTE(Kwanza26 @ Dec 16, 2004 - 9:46 AM)

They are not the same because the water systems are slightly different between the two, but the gasket should work none-the-less...
[right][snapback]222284[/snapback][/right]

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

Kwanza26

#4

-doGGy+Dec 16, 2004 - 4:48 PM

QUOTE(doGGy @ Dec 16, 2004 - 4:48 PM)

So does the 4A gasket gonna fit the 7A or not how do you think? Cuz i found HKS 4A 1.6 mm head gasket for a good price and i want to get it...
[right][snapback]222286[/snapback][/right]

It should fit, and all of the cooling jackets and stuff should line up correctly, but they're not sized perfectly. It should still work. The blocks are essentially the same in design, it's just the 7AFE flows water opposite of the 4AG 16V so a few of the jackets are slightly different sizes...

---

"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...

doGGy

#5

Thanks Kwanza.


-Kwanza26+Dec 16, 2004 - 10:16 AM

QUOTE(Kwanza26 @ Dec 16, 2004 - 10:16 AM)

-doGGy+Dec 16, 2004 - 4:48 PM

QUOTE(doGGy @ Dec 16, 2004 - 4:48 PM)

So does the 4A gasket gonna fit the 7A or not how do you think? Cuz i found HKS 4A 1.6 mm head gasket for a good price and i want to get it...
[right][snapback]222286[/snapback][/right]

It should fit, and all of the cooling jackets and stuff should line up correctly, but they're not sized perfectly. It should still work. The blocks are essentially the same in design, it's just the 7AFE flows water opposite of the 4AG 16V so a few of the jackets are slightly different sizes...
[right][snapback]222306[/snapback][/right]

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

FallenHero

#6

=beat me to it. If the 4ag head works on the 7afe block, then the gaskets are bound to work also. >>

doGGy

#7

Did i miss somthing out? All the HKS head gaskets come in 82mm bore, then stock 7A and 4A is 81 mm bore...


shiz..

Some one please help me to get 1.6mm head gasket....

>>

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

edo17982

#8

-doGGy+Dec 20, 2004 - 11:58 AM

QUOTE(doGGy @ Dec 20, 2004 - 11:58 AM)

Did i miss somthing out? All the HKS head gaskets come in 82mm bore, then stock 7A and 4A is 81 mm bore...


shiz..

Some one please help me to get 1.6mm head gasket....

>>
[right][snapback]224000[/snapback][/right]

Man I already know that ya love me >> >> >> >> >>

4AGE gasket

They can make any thickness just ask them >>

This post has been edited by edo17982: Dec 20, 2004 - 12:54 PM

playr158

#9

yo thats not far from my house....and they dont' ship to you...

if you want i can get that for you and send it to you

doGGy

#10

Ya know, then you get to my country, to my house, i will give you a big kiss... >>

-edo17982+Dec 20, 2004 - 10:49 AM

QUOTE(edo17982 @ Dec 20, 2004 - 10:49 AM)

-doGGy+Dec 20, 2004 - 11:58 AM

QUOTE(doGGy @ Dec 20, 2004 - 11:58 AM)

Did i miss somthing out? All the HKS head gaskets come in 82mm bore, then stock 7A and 4A is 81 mm bore...


shiz..

Some one please help me to get 1.6mm head gasket....

>>
[right][snapback]224000[/snapback][/right]

Man I already know that ya love me >> >> >> >> >>

4AGE gasket

They can make any thickness just ask them >>
[right][snapback]224094[/snapback][/right]

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

doGGy

#11

woha >> Well, consider you have one order awaiting. I will contact you after new year about this one >>

Thanks


-playr158+Dec 20, 2004 - 10:43 PM

QUOTE(playr158 @ Dec 20, 2004 - 10:43 PM)

yo thats not far from my house....and they dont' ship to you...

if you want i can get that for you and send it to you
[right][snapback]224446[/snapback][/right]

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>