I got my indigo gauges installed today (they are sweet >> ) but the button for them that changes the color and brightness.........

it doesnt stick to anything
it just hangs there

what should i se to keep it stuck to something?

Well, I don't have much experience in this, but I've got an idea. Perhaps you could pull off the front of the dash and drill a hole in it about the size of the button. Then you could put some type of molding/holding material on the other side to fasten it to the side of the dash you can't see when it's all put back together. Slip your button through the hole, fasten it and then put the dash back on. I don't know if it would work, but it's an idea.

That is a good idea no doubt but unfortunatley this button is like... a piece of paper with buttons buttons on it, its kindof hard to explain just look at some pics. But thanks for the advice though!

Velcro it to the top of your dash. To the left side of the steering wheel, above the dash. That should work, and there probably won't be permenant reprecussions of doing so and no damage to your vehicle. Also a cheap do-it-yourself!

Very good idea! Now jsut let me get my hands on some velcro!

dude that button should of come with some 3M tape on the back. I put mine in the fuse box on the drivers side. In there I stuck it to the metal bar that runs across the fuse box.
Bryan

Yeah it does but the stickyness is gone for some reason. The velcro idea seems to be ok with me. Unless anybody has a better idea >>