Ok i am purchasing a carbon fiber shift boot from a guy that makes them. He has never made one for our cars so he wants the dimensions. The only problem is i was an idiot and cut my shifter short so i cut my shift boot. Now i got a TRD quickshifter and need a new boot. If someone could do me a big favor and just measure the shift boot for me. I need the bottoms length and width. And then i will also need the depth/height of the boot as well. If your willing to do this just also let me know where exactly you measure from so i can tell him. Thanks a lot!

for the bottom just measure the distance between the clips that hold the boot in place. the only problem you will run into is the stock boots have a small metal bar that fits in the clips...

thats an easy problem to fix i bought a new shift boot off ebay and just sew my stock shift boots bar into the new one...

-DMC

Yea i figured i would just do the same but the guy wants me to ge tthe dimensions to make sure it fits. My shift boot is just a little destroyed so i wanted dimensions from one in good condition.