Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #20634

Couple engine questions - 6G Celicas Forums

Topic #20634 3 posts Started by spunky393
spunky393
#1
The bore and stroke of my 2.2 L 5s-fe engine is 3.43 x 3.58

so obviosly it isn't near square bore. It is possible, and if it's not. Then how big can we get without having over heating issues? ANY help is appreciated, lets here it 6GC
The most important lesson I learned from Karate-Dô Kyôshan–“You can not be what you do not believe you are”
spunky393
#2
BUMP danget
The most important lesson I learned from Karate-Dô Kyôshan–“You can not be what you do not believe you are”
Kwanza26
#3
Not really big. Because of the block design (solid cast), the biggest spec bore is probably only a few mm larger than the stock, which is roughly 87.5mm if I remember correctly. I'd say you wouldn't be able to get more than 89mm overbore...
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
← Back to Topics