Over 1M Posts • 84K Topics • 9K Authors

WTB: Eurou wing risers - 6G Celicas Forums

Topic #21976 10 posts Started by HaRv3sTeR
as topic said

I know they are rare, but if anyone can help, post please
Good luck, I've searched high and low with absolutely no luck. Your best bet is custom.

Sometimes we live to beat the odds.-Ryanaim: rkgreen04
-Akimbo+Mar 4, 2005 - 1:32 AM
QUOTE(Akimbo @ Mar 4, 2005 - 1:32 AM)
Good luck, I've searched high and low with absolutely no luck. Your best bet is custom.
[right][snapback]252917[/snapback][/right]


I know dude...but DogGy's custom risers are still too high IMO >frown.gif>
doggy's
user posted image

euros
user posted image

I just wanted to see the pics side by side.
you are right. doggy's are a bit higher in the back but not much. I think doggs are better. Euros I remember were $200+...

This post has been edited by Batman722: Mar 4, 2005 - 12:15 AM

my st205 swapandour Beams swap
You all wanted what they where angled? So they are, if i made them flat, they would be rather like euros. If the angle was a bit lower on myne, the spoiler would look like it is falling from the car (like on the Euro pic, spoiler is leaned backwards). Hatch trunk lines goes down, so i needed to make bigger angle to compensate hatch angle, now spoiler look more angled in front and whats why the rear of the blocks is bigger then the euros...

Hope you yunderstand what i wrote >smile.gif>

And yes, mynes are bigger.....


-Batman722+Mar 3, 2005 - 10:12 PM
QUOTE(Batman722 @ Mar 3, 2005 - 10:12 PM)
doggy's
user posted image

euros
user posted image

I just wanted to see the pics side by side.
you are right. doggy's are a bit higher in the back but not much. I think doggs are better. Euros I remember were $200+...
[right][snapback]253041[/snapback][/right]


Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>
If you really are in the hunt for the lower then the custom ones, i will be able to make you them (only one pair) on your demand, just wait till i get these customs from mold, then lowering them will take another day of work to get you a pair in what ever heigh you want >wink.gif>


-HaRv3sTeR+Mar 3, 2005 - 6:03 PM
QUOTE(HaRv3sTeR @ Mar 3, 2005 - 6:03 PM)
as topic said

I know they are rare, but if anyone can help, post please
[right][snapback]252905[/snapback][/right]


Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>
You might want to check out GT-Four extensions in person if you can. Natalie's wing looks huge with them in pictures, but pictures don't do the wing justice. It looks gorgeous in person. I'm sure it's the same way with Romas' extensions. >smile.gif>

New Toyota project coming soon...
-doGGy+Mar 4, 2005 - 6:33 AM
QUOTE(doGGy @ Mar 4, 2005 - 6:33 AM)
If you really are in the hunt for the lower then the custom ones, i will be able to make you them (only one pair) on your demand, just wait till i get these customs from mold, then lowering them will take another day of work to get you a pair in what ever heigh you want >wink.gif>


-HaRv3sTeR+Mar 3, 2005 - 6:03 PM
QUOTE(HaRv3sTeR @ Mar 3, 2005 - 6:03 PM)
as topic said

I know they are rare, but if anyone can help, post please
[right][snapback]252905[/snapback][/right]

[right][snapback]253081[/snapback][/right]


thx ALOT DoGgy...that's really nice

I want my raisers the exact same height as the eurou's with the exact inclinaison as your custom blocks
-HaRv3sTeR+Mar 4, 2005 - 2:53 PM
QUOTE(HaRv3sTeR @ Mar 4, 2005 - 2:53 PM)
 
I want my raisers the exact same height as the eurou's with the exact inclinaison as your custom blocks
[right][snapback]253289[/snapback][/right]



Did you not read what doggy said? If you want incline it will look like doggys blocks. If you want euros, you can NOT have inclide. You can't have both incline and the same look as euros.

umm here is some pictures.. to save doggy the head ache.


EURO: notices the red slope.

user posted image

DOGGY's: notice the incline, but also see how the blocks have to be taller?

user posted image
Thanks alot >smile.gif> i was trying to explain this >smile.gif>

It will look weird if the block where the same height in both ends.....


-Hanyo+Mar 4, 2005 - 5:04 PM
QUOTE(Hanyo @ Mar 4, 2005 - 5:04 PM)
-HaRv3sTeR+Mar 4, 2005 - 2:53 PM
QUOTE(HaRv3sTeR @ Mar 4, 2005 - 2:53 PM)
 
I want my raisers the exact same height as the eurou's with the exact inclinaison as your custom blocks
[right][snapback]253289[/snapback][/right]



Did you not read what doggy said? If you want incline it will look like doggys blocks. If you want euros, you can NOT have inclide. You can't have both incline and the same look as euros.

umm here is some pictures.. to save doggy the head ache.


EURO: notices the red slope.

user posted image

DOGGY's: notice the incline, but also see how the blocks have to be taller?

user posted image
[right][snapback]253336[/snapback][/right]


Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>