i am wiring three type r's and i am doing it as pictured.


but my amp is a DEI (directed, viper etc) and where you connect the power, ground, remote, speaker + - it is not your average screw connecter but a seperate peice that the wire is inserted into and is than plugged into the amp.

my question is as follows.

when i run all three positive and negative wires... they will not fit in the given hole. Could i run them (12 ga) and use a butt connector to splice all three into a single (8-12 ga) wire and run that to the amp?

essentially i would be running three wires the +, or - and than turning them into one wire before entering the amp.

_____________
_____________ [splice] amp (+)
_____________


_____________
_____________ [splice] amp (-)
_____________

or would that restrict them, thanks for your time

This post has been edited by blkGT: May 11, 2005 - 9:46 PM

as long as it is wired like that, then it will work... what i do is run the pos and neg from the amp to the first sub, and then run seperate wire from that same pos and neg wire to the next sub, and so on..

you will be so happy with those type R's , they hit mad hard, three will blow u away, one does crazy things.

what amp do you have anyways?

Kyel get in touch with me, I'll help you hook it up.

thanks vin, but im doin it right now.. lets hook up soon tho

i will take pics later guys i have a custom enclosure for my 01 silverado z71. not painted yet but i couldnt wait.

i had 2 type r's in the celli

my amp is a 1200d viper audio. (DEI) same company that makes directed, but a step up from the 1100d.

1200 watts at 1 ohm