Wolfrace Street octane 7X17"
Anyone know if these will fit a Celica GT st202
http://www.wolfrace.co.uk/
Anyone know if these will fit a Celica GT st202
http://www.wolfrace.co.uk/
Wolfrace Street octane - 6G Celicas Forums
Its impossible to tell from that website because they do not give the bolt pattern or offsets. However, I note the picture shows a 4 lug pattern which would be tricky on a 6gc.... >
>
>
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
Pity they look so good. What offsets are compatable with the GT then?
-jgreening+May 31, 2005 - 3:06 PM
-jgreening+May 31, 2005 - 3:06 PM
QUOTE(jgreening @ May 31, 2005 - 3:06 PM)
Its impossible to tell from that website because they do not give the bolt pattern or offsets. However, I note the picture shows a 4 lug pattern which would be tricky on a 6gc.... >>
[right][snapback]293509[/snapback][/right]
>[right][snapback]293509[/snapback][/right]
Try a search on the term "offset" with my board name as the poster. I have discussed this countless times.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
http://rochfordtyres.co.uk/product.asp?num...teria=&PT_ID=59
About as cheap as i think you'll get them unless they are on a special offer somewhere (take it your from UK). The et of 38 is a touch high to be perfect, but it's unlikely you'll notice any real difference.
FYI, for celica it needs to be 5*100pcd, et35-45 with 35 being ideal, any greater than this and the wheel starts to look sunken into the body. You can of course get spacers to shift them out.
About as cheap as i think you'll get them unless they are on a special offer somewhere (take it your from UK). The et of 38 is a touch high to be perfect, but it's unlikely you'll notice any real difference.
FYI, for celica it needs to be 5*100pcd, et35-45 with 35 being ideal, any greater than this and the wheel starts to look sunken into the body. You can of course get spacers to shift them out.
if u love the rims so much u could always do the 4 lug conversion.
the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.
Don;t think my first post was clear enough - yes you can get them in the right fittings for the celica - follow the link and you will see the options. one of them is for 5x100 which will fit.
It says the offset is +38 which will fit. Good luck.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.