Find out what boost he was at for sure and get some time slips or something. Video would be cool, too.

Sorry guys, just looked it up and it runs 13's stock, 14's if it's Caqrrera 4.

Still much faster than a 7afte. . runs 17's stock . . it MIGHT have 225hp, best case scanario, which would be 14's, so it smoked a 13 second card ?

Come on.

Dr.

-jgreening+Jul 3, 2005 - 2:08 PM

yea u dont have to remind me i understand im just sayin in general not all porsches kill everything....boxster is an example of a slower porsche calm the **** down

-MonsterBOX+Jul 5, 2005 - 12:16 AM

I just asked a question. I am not very familar with Porsches. Calm down?

This post has been edited by jgreening: Jul 5, 2005 - 12:31 AM

sorry i miss understood internet sucks sometimes....boxster isnt the same as carrera at all it has like 220hp

drnovascotia---

the 7AFTE has indeed the potential to push over 225whp at ruffly 15psi
you need to do your homework before speaking.....

but oobe
when you do get back to your celica with a blow motor lol
let me know exactly wat PSI and such he was running so i'll have a lil more info for my project

but good thing with mine is.....from the start i'm using forged internals

I will let you guys know, haha. But I told him to ease up on it because I have never fully enjoyed the car since it was turboed so I want to do it this time I go back home in a month. After that, he can push 1000 PSI and blow it to smithereens if he wants...he'll be the one rebuilding it, LOL! >>

you need to stop speaking pure and utter BS. runs 13's and 14's model depentent the 1/4, I'm fairly certain this is correct

Show me dyno's of 7afte's on 15psi with over 225hp and I'll shut up, or show me a 1/4 slip with a 7afte that used to run 17's now run 13's.

stock 7afe is less than 100hp to the wheels, 225 would be a damn lot from such a small engine, even if the stock HG could take 15psi, which I'm not sure of on the 7afe. forgive me if I seem reluctant to believe this car smoked a porsche, but I believe myself and others seem to agree this doesn't sound 100% correct.

And "leaving it behind"? thats gotta mean the celica would need to run 12's, right ?

Don't single me out as the only one not believing you, and I readily admit I might be wrong, i'm even asking you to do so.

Dr.

This post has been edited by drnovascotia: Jul 5, 2005 - 10:35 PM

bring us footage of your boost gauge hittin whatever it is he ran and take a drive with the camera. hell a dyno sheet or time slip on your valve cover would be nice too...

-drnovascotia+Jul 6, 2005 - 3:01 AM


kwanza ran a 16 second quarter mile in a 7afe with no boost at all, and that is recorded. I'm sure with moderate boost, a 7afte could shave off 2 seconds rather easily.

I'm guessing that the Porsche was most definitely a Boxter, and not an S, and definitely not a 911 Carrera or Carrera GT.

n/a i ran 17.4 in my ST......and i can go down to the 16s with practice

"Show me dyno's of 7afte's on 15psi with over 225hp and I'll shut up, or show me a 1/4 slip with a 7afte that used to run 17's now run 13's."

and you need to learn STs cause you can ride a decent amount over 200whp with 12psi on stock internals

and i believe with my setup i'll clear 15psi and 250whp is my goal

And maybe with a built engine you'll get that. you expect to almost triple the hp of a car with 12psi ?

I'm sure a ST can gets 16's, but thats still damn slow, lol. But I don't drive my celica for speed so thats no biggie

Your answer still didn't provide any proof . . . .

and still doesn't show how a 240hp could smoke a porsche. . .

I'm not trashing the 7afte, I almost turbo'd my 4afe. but I'm not seeing any proof it'll smoke a porche here. . .

Dr.

porsche really isn't all that fast either.....

but you have to consider weight/power ratio
and boost ect.....

-drnovascotia+Jul 5, 2005 - 8:01 PM

i'm not single anyone out but i'm here with my facts on the 7afte everyone knows the parts i had on my 7afte and saw the dyno sheets and dyno videos

so here we go.....

go here for dyno charts

i dont know who won the race dont really care

now for facts

On a Garrett T3 50 trim turbo my car did 170 WHP 180 torque at 9.5 psi

on my run to do 14 psi at 3700 rpm i had to cut it off because i was going lean on my small injectors at that point i hit 2400 rpm to go so my conclusion is it will hit close to 200whp 220 torque at 14-15 psi

NOW look on different turbos you can hit 10 horse more at the same boost level so at 15psi on a bigger turbo like t3 60 trim etc him could be close to 210-220 whp

now you want a 1/4 mile slip i can get one from psi racing but its 7afte in a 90's corolla body so its lighter and it did a 14.4 pass

Now you guys can go on and yell at each other about who won but a 7afte is not a super motor but is a quick car at 10-15 psi and alot of fun to drive

so does anyone want to call BS on me??

This post has been edited by nik: Jul 12, 2005 - 4:48 PM

http://www.fast-autos.net/porsche/03porscheboxsters.html

theres a boxster S stats. I'd still put my money on the porsche mainly b/c they are sexy ^_^

porsche is nasty = poor ****

There you go, I see 170hp . . not this 250 he's claming
t3 would make your spool slooooow,

Thats what I would expect, and bet that turbo spools quick and gets full boost by 3500, It'd be good out of the gate. . .like I said not downplaying it at all

your numbers seem right to me. And i'm not trying to call anyone out, but I don't want people thinking turboing a 100hp engine will smoke a porsche. . . .

Thanks for the info!

Dr.

see there you are again
"t3 would make your spool slooooow"

thats not true....a T3 can spoll rather quick on a 7afe

and yes you can turn a 7afe into a porsche beater just not a gt2 or anything crazy like