these will be for sale soon
3.3l 3mz long block w/ less then 3k from 04 seinna
3.0l 1mz w/ vvti with less then 4k from 00 avalon
both motors needed to make one .. as the 3mz was in a car with interior fire but long block and internals are fine .. 98% of 1mz stuff transfers over so you will have a 3mz but be able to use 1mz electronics and t/b set up
tranny options
solara tranny w/ mr2 lsd 26k on tranny
or just solara tranny
other parts
fidanza v6 flywheel
clutch master stage 2 used
vvti evap w/ vaccuum sensor
vvti ecu w/ pigtails
1mz a/c compressor
misc oem install parts for 1mz
mr2 axles and v6 rear shaft
v6 headers and y-pipe (good to use as templet for nice exhaust)
i am not pricing at this time but just motors cost me 1500 and tranny w/ lsd is 600
just putting this out there if anyone is interested .. i may keep and install into a celica for a daily driver but will consider serious offers
swap is just as "easy" as 3sgte just more wiring to deal with. Install is about same as 3sgte but requires some minro fabrication .. not reccomended for a novice swapper as first swap ..
with some minor head work and nice exhaust and intake you could make over 230-250hp with this motor as NA .. can take it to 3.5l and you would have a monster that will smoke any stock or mildly modded 3sgte off the line ..i saw a stock v6 in a mr2 beat a turbo mr2 off the line but it just lost race by 20 feet for so and it was stock v6..
feel free to PM me ..
BTW I am located in cincinnati area ..will deliver to surrounding area
This post has been edited by FORGMANN: Jul 3, 2005 - 3:16 PM
3.3l 3mz long block w/ less then 3k from 04 seinna
3.0l 1mz w/ vvti with less then 4k from 00 avalon
both motors needed to make one .. as the 3mz was in a car with interior fire but long block and internals are fine .. 98% of 1mz stuff transfers over so you will have a 3mz but be able to use 1mz electronics and t/b set up
tranny options
solara tranny w/ mr2 lsd 26k on tranny
or just solara tranny
other parts
fidanza v6 flywheel
clutch master stage 2 used
vvti evap w/ vaccuum sensor
vvti ecu w/ pigtails
1mz a/c compressor
misc oem install parts for 1mz
mr2 axles and v6 rear shaft
v6 headers and y-pipe (good to use as templet for nice exhaust)
i am not pricing at this time but just motors cost me 1500 and tranny w/ lsd is 600
just putting this out there if anyone is interested .. i may keep and install into a celica for a daily driver but will consider serious offers
swap is just as "easy" as 3sgte just more wiring to deal with. Install is about same as 3sgte but requires some minro fabrication .. not reccomended for a novice swapper as first swap ..
with some minor head work and nice exhaust and intake you could make over 230-250hp with this motor as NA .. can take it to 3.5l and you would have a monster that will smoke any stock or mildly modded 3sgte off the line ..i saw a stock v6 in a mr2 beat a turbo mr2 off the line but it just lost race by 20 feet for so and it was stock v6..
feel free to PM me ..
BTW I am located in cincinnati area ..will deliver to surrounding area
This post has been edited by FORGMANN: Jul 3, 2005 - 3:16 PM
Old guy with the toys95 ST205 WRC (the real deal)94 MR2 HARDTOP Supercharged 2GR/6SPD 22 owned