Does the car have all the power options? If so, how much would you want for the driver's side door, like, complete door, with hinges? Gotta find one of those.
FS: Parts from 3S-GTE project and '94 GT Coupe - 6G Celicas Forums
How much for the teins?
This post has been edited by Fietsbel: Jul 19, 2005 - 7:14 AM
This post has been edited by Fietsbel: Jul 19, 2005 - 7:14 AM
My 6gc Profile - pics and specs of my car
-jgreening+Jul 19, 2005 - 4:40 AM
thanks, unforgelty i wish i was still doing this. but a swap like this i dont have ot tools or knowelge to complete it.
-trdevelopment+Jul 19, 2005 - 4:52 AM
yes
-Fate+Jul 19, 2005 - 4:55 AM
rims are still for grabs
-Mosaiah+Jul 19, 2005 - 5:06 AM
power evreythign
-Fietsbel+Jul 19, 2005 - 12:13 PM
looking to get $1100
QUOTE(jgreening @ Jul 19, 2005 - 4:40 AM)
-drdos+Jul 18, 2005 - 11:13 PM
No problem, I will. Good luck with your sale. Too bad your project didn't work out - you would have enjoyed the 3s - especially at the power levels you were shooting for. Best regards, Jay.
[right][snapback]314094[/snapback][/right]
QUOTE(drdos @ Jul 18, 2005 - 11:13 PM)
Then buy it from them.
[right][snapback]314085[/snapback][/right]
[right][snapback]314085[/snapback][/right]
No problem, I will. Good luck with your sale. Too bad your project didn't work out - you would have enjoyed the 3s - especially at the power levels you were shooting for. Best regards, Jay.
[right][snapback]314094[/snapback][/right]
thanks, unforgelty i wish i was still doing this. but a swap like this i dont have ot tools or knowelge to complete it.
-trdevelopment+Jul 19, 2005 - 4:52 AM
QUOTE(trdevelopment @ Jul 19, 2005 - 4:52 AM)
are you selling the shift boot trim?
[right][snapback]314098[/snapback][/right]
[right][snapback]314098[/snapback][/right]
yes
-Fate+Jul 19, 2005 - 4:55 AM
QUOTE(Fate @ Jul 19, 2005 - 4:55 AM)
any word on the rims? did the other guy take em?
[right][snapback]314099[/snapback][/right]
[right][snapback]314099[/snapback][/right]
rims are still for grabs
-Mosaiah+Jul 19, 2005 - 5:06 AM
QUOTE(Mosaiah @ Jul 19, 2005 - 5:06 AM)
Does the car have all the power options? If so, how much would you want for the driver's side door, like, complete door, with hinges? Gotta find one of those.
[right][snapback]314101[/snapback][/right]
[right][snapback]314101[/snapback][/right]
power evreythign
-Fietsbel+Jul 19, 2005 - 12:13 PM
QUOTE(Fietsbel @ Jul 19, 2005 - 12:13 PM)
How much for the teins?
[right][snapback]314149[/snapback][/right]
[right][snapback]314149[/snapback][/right]
looking to get $1100
And what are the costs to send it to Europe? (the netherlands to be exactly)
My 6gc Profile - pics and specs of my car
Manual Transmission
Shifter
Shift Cables
Shifter Trim
Shift Boot
Clutch Master Cylinder
Slave Cylinder
Clutch Metal Fluid Lines
Rubber Clutch Line
Flywheel Bolts
Pressure Plate Bolts
Clutch Pedal Assembly
Manual Brake Pedal Assembly
Manual Transmission Driver's Side Mount
Manual Starter Relay
2 bolts for Tranny - 12 by 1.25 (1 is 65mm other is 75mm)
these are all the things i am trying to buy from him, he's just thinking about it.
Shifter
Shift Cables
Shifter Trim
Shift Boot
Clutch Master Cylinder
Slave Cylinder
Clutch Metal Fluid Lines
Rubber Clutch Line
Flywheel Bolts
Pressure Plate Bolts
Clutch Pedal Assembly
Manual Brake Pedal Assembly
Manual Transmission Driver's Side Mount
Manual Starter Relay
2 bolts for Tranny - 12 by 1.25 (1 is 65mm other is 75mm)
these are all the things i am trying to buy from him, he's just thinking about it.
dibs on the center console cluster panel
the panel that goes around the radio, clock, hazard button, and center vents vents
I also need the hazard button and the clock as well
If the radio holder is still available that would be nice to have as well
The inside door handle bezle on the driver side (mine cracked)
This post has been edited by gamesteristj: Jul 19, 2005 - 12:16 PM
the panel that goes around the radio, clock, hazard button, and center vents vents
I also need the hazard button and the clock as well
If the radio holder is still available that would be nice to have as well
The inside door handle bezle on the driver side (mine cracked)
This post has been edited by gamesteristj: Jul 19, 2005 - 12:16 PM
how much do you want for the head, block, flywheel, and cam gears?
-3sgte@daspeedof+Jul 19, 2005 - 5:43 PM
the 3s block or the 5sfe block?
QUOTE(3sgte@daspeedof @ Jul 19, 2005 - 5:43 PM)
how much do you want for the head, block, flywheel, and cam gears?
[right][snapback]314228[/snapback][/right]
[right][snapback]314228[/snapback][/right]
the 3s block or the 5sfe block?
-Fietsbel+Jul 19, 2005 - 1:50 PM
i have no idea probley a forgein
QUOTE(Fietsbel @ Jul 19, 2005 - 1:50 PM)
And what are the costs to send it to Europe? (the netherlands to be exactly)
[right][snapback]314161[/snapback][/right]
[right][snapback]314161[/snapback][/right]
i have no idea probley a forgein
Still no response... Just wondering if I could get the center console lid. Thanks.
QUOTE (cjh4l22 @ May 15, 2009 - 4:02 AM)hey, nice mod does it come in hetero?Need parts?I'm parting out a '94 ST
-Cutrara+Jul 19, 2005 - 8:31 PM
just give me till tmr im sick as a dog right now..
evryeone that wanetd something just PM me again. i had t delete all my msg's
QUOTE(Cutrara @ Jul 19, 2005 - 8:31 PM)
Still no response... Just wondering if I could get the center console lid. Thanks.
[right][snapback]314292[/snapback][/right]
[right][snapback]314292[/snapback][/right]
just give me till tmr im sick as a dog right now..
evryeone that wanetd something just PM me again. i had t delete all my msg's
Price on seats w/ sliders
Also, I need both driver and passanger side inner door panels, the whole pieces. Shoot me prices!
Also, I need both driver and passanger side inner door panels, the whole pieces. Shoot me prices!
how much for -
Calipers
Rotors
Internal Brake components for parking brake
Backplates
Parking brake cables
basically the parts needed to do rear drum-to-disc conversion. coupe rear discs will fit on a hatch, right?
EDIT: how much for stock front strut bar?
This post has been edited by rocky2006: Jul 19, 2005 - 5:01 PM
Calipers
Rotors
Internal Brake components for parking brake
Backplates
Parking brake cables
basically the parts needed to do rear drum-to-disc conversion. coupe rear discs will fit on a hatch, right?
EDIT: how much for stock front strut bar?
This post has been edited by rocky2006: Jul 19, 2005 - 5:01 PM
Do you have any ST205 mounts ?
MyFlickrMyeBay_Perpetual Aperture_
Ok, Hope you're feeling better soon.
QUOTE (cjh4l22 @ May 15, 2009 - 4:02 AM)hey, nice mod does it come in hetero?Need parts?I'm parting out a '94 ST
-Supersprynt+Jul 19, 2005 - 10:00 PM
no i do not.. sorry
QUOTE(Supersprynt @ Jul 19, 2005 - 10:00 PM)
Do you have any ST205 mounts ?
[right][snapback]314310[/snapback][/right]
[right][snapback]314310[/snapback][/right]
no i do not.. sorry
How much for the MR2 tranny and axels? Is everything in NY or Florida? May e interested in the 3s engine also. PM me a price or post it if that is more convienent.
1995 Celica GT 5 Speed Convertible1996 Supra NA-T 5 Speed Targa2000 4Runner 4x4 Limited Supercharged
how much for all four head ligths? I only need the lamp as i have the bulbs and harnesses
Tenzo R Rally Seats w/sliders . Price if noone has bought?
ok i belive i got back to most of ur pm's if i missed you. please pm me a gan and slap me lol
i am interested in the cam gears and flywheel. let me know of a price
1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.