Im planning to buy projectors very soon and want to know what the 3-prong connectors (that I need for wiring the low beams) look like...a picture would be VERY appreciated
TIA
TIA
3 prong connectors - 6G Celicas Forums
just go to autozone and ask for a couple H4 connectors.
Jared Harwell
-Phat_99CeliGT+Jul 19, 2005 - 4:17 AM
arent the lows H1? why H4?
QUOTE(Phat_99CeliGT @ Jul 19, 2005 - 4:17 AM)
just go to autozone and ask for a couple H4 connectors.
[right][snapback]314086[/snapback][/right]
[right][snapback]314086[/snapback][/right]
arent the lows H1? why H4?
H1 and H4 are the same for two, H4 has an extra prong, just like the 110v american outlets. The third is used in some cases, not in others.
They didnt sell an H1 specific when I went to buy mine, I got H4s from napa, advance had them a lot cheaper.
They didnt sell an H1 specific when I went to buy mine, I got H4s from napa, advance had them a lot cheaper.
If anyone needs interior stuff, etc, I'm parting whats left of my celi out. Just ask.
Yup it doesnt matter of you get a H4 connector. The middle plug is not needed for H1.
JDM Powerplant installed, BPU coming very soon!
thx for the info guys
Also your going have to cut and crimp the wires, while you are at Autozone get one of these 
>
> cause your going to have to crimp the wires. I used the smallest size which is red worked great- cost me about 7 bucks i think
>> cause your going to have to crimp the wires. I used the smallest size which is red worked great- cost me about 7 bucks i think
Buy my Celica $2,500 -http://www.6gc.net/forums/index.php?showtopic=76562&st=0