HELP!!! Air to Fuel Gauge - 6G Celicas Forums

beastman

#1

I just bought an air to fuel ratio gauge and i got all the other wires attached to where they need to be but the green wire(the one that goes to the o2 sensor on the manifold) which wire do i attach it to? The blue wire or the white? someone plz help me out!!!

This post has been edited by beastman: Aug 15, 2005 - 4:31 PM

Former Celica Owner... RIP 08-2007Now proud owner of a 2007 Solara w/ TRD exhaust, TRD FTSB, TRD Lowering Springs & many other goodies...

celicast3sgte

#2

-beastman+Aug 15, 2005 - 4:29 PM

QUOTE(beastman @ Aug 15, 2005 - 4:29 PM)

I just bought an air to fuel ratio gauge and i got all the other wires attached to where they need to be but the green wire(the one that goes to the o2 sensor on the manifold) which wire do i attach it to? The blue wire or the white? someone plz help me out!!!
[right][snapback]324437[/snapback][/right]

use the o2 wire going to the ecu just tap it there that way you dont have to go thru the firewall which it sounds like thats what ur doing... here the link i think 5S-FE Ecu diagram

94' ST Coupe - 5sfe Motor swap and brake swap.

Valo666

#3

ty..im duin an a/f gauge in a week or 2 n i guess tapping into the ECU is much easier than running up through the fender n so on.

HELP!!! Air to Fuel Gauge - 6G Celicas Forums

Contact 6GC Archives