Coomer

#1

What do you guys use to pull a 7A-FE? There's one hook near the throttle body, but there's not one on the front of the block. I'm just wondering what you guys have used to pull the engine.

---

New Toyota project coming soon...

celicast3sgte

#2

you can use the coolant neck near the front or just a bolt from the exhaust manifold, ive done that on a couple honda swap i did.

---

94' ST Coupe - 5sfe Motor swap and brake swap.

Defgeph

#3

hook up to the alt. bracket.

DEF

---

I will return one day.

Coomer

#4

Alright, thanks for the help guys. >>

---

New Toyota project coming soon...

Dr_Tweak

#5

DO NOT hook a chain up to the coolant neck!

You can use either the alternator bracket, or just grab a hook off another engine and bolt it in there, there is a place for it.

-Doc

---

-Dr Tweak, 6GC's resident engine swap wiring expert extraordinaireClick here to see my swapsdrtweak@phoenixtuning.com

celicast3sgte

#6

-Dr_Tweak+Sep 21, 2005 - 4:36 PM

QUOTE(Dr_Tweak @ Sep 21, 2005 - 4:36 PM)

DO NOT hook a chain up to the coolant neck!

You can use either the alternator bracket, or just grab a hook off another engine and bolt it in there, there is a place for it.

-Doc
[right][snapback]337061[/snapback][/right]

lol that response took longer than i had guessed, i use it if im lazy and im just pulling out the old motor i dont care about nemore. so im guessing your taking the parts ST apart coomer?

---

94' ST Coupe - 5sfe Motor swap and brake swap.

playr158

#7

lol i ran my chain under the intake manifold i had no hooks >>

gamesteristj

#8

I ran a rope around the front (pulley side) engine mount to the hook so that I could swing it easier. But I don't know...
tj

soulshadow

#9

get urself an engine hoist and use the hole at the end of one of the hoist and attach a bolt through it than bolt that on to the front of the engine on the top left.

FAQdaWorld

#10

I just used the studs from the exhaust manifold.

---

AIM : FAQdaWorld