Over 1M Posts • 84K Topics • 9K Authors

FS: misc Celi parts CHEAP! - 6G Celicas Forums

Topic #29830 80 posts Started by NEVERSTOP
ok heres some of the stuff I got for sale.. pretty much everything is best offer plus shipping and I need to get rid of this stuff so I'll take about anything.. go ahead and just post your offers here, Any items with a price next to them is what I want for em and I'm not gonna budge on those items.

I will be posting more stuff when I figure out exactly what else I have also

Thanks
NEVER-

Gonna post who is inline for the parts so it easier for me to keep track, if you change your mind let me know so I can take your name down - thanks

Passenger low beam *SOLD* Dustin15brown

Driver side GT4 Tail light (the orange lens is loose inside but you can EASILY modify it to just a clear lens.. its looks way better this way. Believe doggy did a howto or someone on here) *SOLD* Dustin15brown

5sfe motor mounts (believe I have all 4 still)

3sgte timing cover (needs to be cleaned)

Washer fluid Resivor SOLD

5sfe exhaust manifold/downpipe

brake fluid resivor

transmission cooler

radiator with 26k on it

radiator with 76k on it

radiator shroud with fans SOLD

passenger mirror housing (no glass)

3sgte alternator

5sfe alternator (disassembled)

ac dash controls

ABS unit (front passengerside engine bay)

Front Calipars Macavely

AUTOMETER Tachometer with shiftlight (silver unsued/no box) $90 Pimped6gen

blown 5sfe (various parts)

5sfe auto transmission (aprrox 70xxx)

Stock rear bumper Celica3sgte

Box of honda parts for d16y (intake,cams, fuel rail,etc)

*new stuff(still got more to come too)*

Neon srt4 intercooler (perfect fit for turbo project, does have a dent in it but had it looked at and should still work fine) $100

set of 94 GT door panels (premium sound system = extra speaker grill) SOLD

two rear hatch cover things (part that lifts up when you open hatch)

Box of misc Intercooler Piping (believe its 2 inch)

Greddy oil catch Tank (unused, no box) $60

MSD BTM (recently sent in to MSD to be inspected and rebuit, unused since, VERY clean) $200

3sgte exhaust manifold

PARTS I AM LOOKING FOR (WILLING TO TRADE)

5sfe valve cover (great condition only)

Hatch back 2 post spoiler One on way >smile.gif>

Electronic Boost controller

Autometer Ultralight (silver) Oil Pressure guage

Front bumper support (really need this! so fork em over invader kit guys!)

3sgte turbo oil pipe

3sgte turbo water pipe

185 heat insulator (heat sheild)

Will add more later

This post has been edited by NEVERSTOP: Oct 19, 2005 - 11:27 PM

99 project version 3.0.. hello SEMA 2010 =)
got dibs on the tac... u got ne pics?
Its your normal large autometer tachometer... the shift light cover is red. my digi is actin really funny on me but will try and get a pic for ya.. otherwise it looks like this:

user posted image

99 project version 3.0.. hello SEMA 2010 =)
how much for 3s alt.?

94' ST Coupe - 5sfe Motor swap and brake swap.
QUOTE
how much for 3s alt.?


Oh I don't care hows $10 plus shipping sound?? I am not sure of the working condition of it. I never used it. It came off a 185. figure shipping will prolly be around $15 for it so $25 and its yours.. if your interested pm or im me

Thanks
Never-

99 project version 3.0.. hello SEMA 2010 =)
how much for the front calipers? Its for two of them right? Do you still have the brackets for them as well?
3sgte timing cover

Is this the upper lower or both? Are all the mounting holes and tabs intact?

How does $15 shipped sound?

Project ST204.5 99.88946% complete...
I'll give you $20 + shipping for the rear bumper.
QUOTE
how much for the front calipers? Its for two of them right? Do you still have the brackets for them as well?


Me and Mac have a trade worked out for these - thanks though. If for some reason it falls threw I will contact you, but don't think it will >smile.gif>

QUOTE
3sgte timing cover

Is this the upper lower or both? Are all the mounting holes and tabs intact?

How does $15 shipped sound?


It is upper only. I know its pretty dirty but should clean up fine. I am unsure if its has any cracks or anything. I will check and if there is I will let you know. I would take $20 shipped no problem

QUOTE
We miss you NEVERSTOP.


Awwwwww....... HAHA I know I have been neglectin all you guys lately SORRY >biggrin.gif>

QUOTE
sent money today


Awesome I pulled the stuff out for ya and everything looks fine. I will get it ready to go tomorrow and will ship as soon as I get the $ THANKS

99 project version 3.0.. hello SEMA 2010 =)
how much for the intake for the d16 (my fiance is looking) if it's a fully assembled intake, what would shipping be to r6w1e4(winkler,manitoba,canada)? thanks
-95gtschick+Oct 11, 2005 - 10:29 PM
QUOTE(95gtschick @ Oct 11, 2005 - 10:29 PM)
how much for the intake for the d16 (my fiance is looking)  if it's a fully assembled intake, what would shipping be to r6w1e4(winkler,manitoba,canada)?  thanks
[right][snapback]343628[/snapback][/right]


Its an intake maifold for a manual (there is a diffence between the auto, believe its with the aic sensor or something like that)

I would really like to just get rid of all the honda parts at once. I would let em all go for $40 plus shipping. I have no clue on shipping though. It prolly wouldn't be cheap cuz of international and weight factors

I can get the weight and dimensions for you on that and call and check..

99 project version 3.0.. hello SEMA 2010 =)
rear bumper sold? because i need one, is it red?

I think Bigfoot is blurry, that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra scary to me, because there's a large, out-of-focus monster roaming the countryside.
Are you selling 7A motor mounts an if you are, are they in very good condition? I need to replace mine but plz reply, thanx.
-NEVERSTOP+Oct 11, 2005 - 11:39 PM
QUOTE(NEVERSTOP @ Oct 11, 2005 - 11:39 PM)
-95gtschick+Oct 11, 2005 - 10:29 PM
QUOTE(95gtschick @ Oct 11, 2005 - 10:29 PM)
how much for the intake for the d16 (my fiance is looking)  if it's a fully assembled intake, what would shipping be to r6w1e4(winkler,manitoba,canada)?  thanks
[right][snapback]343628[/snapback][/right]


Its an intake maifold for a manual (there is a diffence between the auto, believe its with the aic sensor or something like that)

I would really like to just get rid of all the honda parts at once. I would let em all go for $40 plus shipping. I have no clue on shipping though. It prolly wouldn't be cheap cuz of international and weight factors

I can get the weight and dimensions for you on that and call and check..
[right][snapback]343634[/snapback][/right]



k well let me know, if it's reasonable he'd probly take it. and he's got a manual (who would want a turbo'd auto civic? >tongue.gif>) >biggrin.gif>
how much you looking at for the motor mounts?

The "Fly Low" Project: 3rd Gen 3SGTE
i want the door panels if they are good, how's $50?
QUOTE
well let me know, if it's reasonable he'd probly take it. and he's got a manual (who would want a turbo'd auto civic? ) 


Turboed autos if geared right are faster.... but there no fun >biggrin.gif>

I need to know the shipping address exactly as I would need it. If you would like to send it to me in PM that would be great. I know you posted some address stuff in your 1st reply but I am unsure as to what is what



As for the Motor mounts: I have to double check em. Think they might be a set of 3sgte ones - sorry about that >smile.gif>

99 project version 3.0.. hello SEMA 2010 =)
Have you had time to check on that timing cover? I can do $20 shipped if it's in great shape.

Project ST204.5 99.88946% complete...
Greddy oil catch Tank (unused, no box) $60

Intrested - I will PM you Mad about this and the thing you asked, maybe we will make a trade >wink.gif>


Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>
Box of misc Intercooler Piping (believe its 2 inch)

Can you check on this for sure?

Also, if doggy doesnt take the catch can, I'd probably be interested in that too.

If anyone needs interior stuff, etc, I'm parting whats left of my celi out. Just ask.
QUOTE
Greddy oil catch Tank (unused, no box) $60

Intrested - I will PM you Mad about this and the thing you asked, maybe we will make a trade


Thats perfectly fine with me man!

QUOTE
Box of misc Intercooler Piping (believe its 2 inch)

Can you check on this for sure?


Man I wish I woulda read this about 30min earlier! I was just up in the loft of my garage which is where that box is. I am pretty sure its 2' but will double check for ya

99 project version 3.0.. hello SEMA 2010 =)
Already recieved the shroud fans.


This post has been edited by 94st_santos: Nov 1, 2005 - 8:28 PM
DUDE I want the door panels, What you want for them I can pay anytime.

I have a green Hatch back 2 post wing.. very minor damage (little bondo will more then fix it. if you wana work out a trade.

This post has been edited by creis: Oct 15, 2005 - 4:45 PM
QUOTE
I'll give you 35 bucks for the radiator shroud with fans. I really need these so if this isn't enough make me an offer.


That's fine with me. Send me a PM and we can work out the details. Thanks

QUOTE
DUDE I want the door panels, What you want for them I can pay anytime.

I have a green Hatch back 2 post wing.. very minor damage (little bondo will more then fix it. if you wana work out a trade.


I have an offer right now for $60 on em but was kinda hoping for a little more than that. I am almost thinking about hangin on to em. I am however interested in the 2 post wing. I am not worried about it being damaged cuz Im gonna cut into peices anyways... I just need the very base areas (where it connects intact) if you got some pics send em to me in a PM or post here. Thanks

99 project version 3.0.. hello SEMA 2010 =)
I have a doorpanel for sale in the forum..... not to jack ur thread or ne thing, but if ur hinkin about keeping them someone could buy my extra
how much for the electronic boost controller?

1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.
also for the oil pressure gauge? and is it mechanical or elctrical?

1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.
-WannabeGT4+Oct 13, 2005 - 11:24 AM
QUOTE(WannabeGT4 @ Oct 13, 2005 - 11:24 AM)
Have you had time to check on that timing cover? I can do $20 shipped if it's in great shape.
[right][snapback]344206[/snapback][/right]


?????

Just need to know what kind of shape it's in.

Project ST204.5 99.88946% complete...