Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #29968

got the projectors - 6G Celicas Forums

Topic #29968 3 posts Started by HaRv3sTeR
HaRv3sTeR
#1
ok...so now im about the put my projectors that i just received...the low beams seem to have already the little rubber sealing installed all around but the high dont have them....Am i supposed to use the seals from the stock highs?

also...are those rubber need to be glued to the lense or the bumper will be enough to hold it in place?

TIA

This post has been edited by HaRv3sTeR: Oct 15, 2005 - 11:59 AM
Phat_99CeliGT
#2
they don't seal to the high beam.

they seal on the bumper itself.

i used a lil silicon to keep mine on.
Jared Harwell
jgreening
#3
-HaRv3sTeR+Oct 15, 2005 - 11:56 AM
QUOTE(HaRv3sTeR @ Oct 15, 2005 - 11:56 AM)
Am i supposed to use the seals from the stock highs?

[Do] those rubber [seals] need to be glued to the lense or the bumper will be enough to hold it in place?

TIA
[right][snapback]344893[/snapback][/right]


Yes.

Not necessarily, but its a good idea. I would "spot" glue them with good silicone so that they can be removed if necessary.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
← Back to Topics