Coomer

#1

Over the weekend, I began doing bodywork on my Celica. I've got a few questions though.

1. How do I remove the two rear side windows?

2. Are the door handles difficult to remove? How do they come out?

3. My sideskirts have large areas right behind the doors that need to be filled, pictured below. What's a good plan of attack to fill these areas?

Attached image(s)

 

---

New Toyota project coming soon...

o0black0o

#2

1. I had mine replaced by apple glass. I saw them take off the back panel where the speaker was and unscrew something. Apprently after that it just pops out.

3. Mold it! Wanna make it look clean, mold it in. That will take the gap and the affect that there was ever a gap.

Coomer

#3

I'll have to pull off the panel and see what it looks like back there.

Oh, I forgot to add that I can't mold anything. I need to be able to take off my fenders and front and rear bumpers to access relocated stuff should stuff go wrong.

---

New Toyota project coming soon...

Defgeph

#4

whats skirts are those ?

---

I will return one day.

o0black0o

#5

Z-Max I think >>

Coomer

#6

-defgeph+Oct 16, 2005 - 9:55 PM

QUOTE(defgeph @ Oct 16, 2005 - 9:55 PM)

whats skirts are those ?
[right][snapback]345448[/snapback][/right]

They're the Way-Glide replicas.

Attached image(s)

 

---

New Toyota project coming soon...

Defgeph

#7

cool man looking great.

---

I will return one day.

CelicaBuddy

#8

OooooOOOOoooh! >>

Looks great!

---

1995 Convertible Celica2003 Nissan Murano SE

CelicaZR

#9

Looking good Coomer >>

---

98 ST204 ZR - Black Beauty - Roaming the streets of Sydney73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser75 TA22 LT - Snow White - Mint Classic Weekend Cruiser77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser94 MX-5 NA8 Clubman - Red Racer - Looking for cornersWIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona86 Corona RT142 - Daily Driver6GC 4 Life Baby!!!

Chanh55

#10

Lucky bastard... Look at that huge garage!

madmods

#11

I would cut a square section off the top, move the cut piece over to take the gap, then glass a small piece of clothover the top to hold the shape. Once that dries, glass the rear with mat to fill in the gap then body work. You can then sand off that piece of glass. Since the rest of the skirt fits, You dont have to slice it fully. Just the top.

azian_advanced

#12

are all z-glyde skirts like that? i sure hope not, i'm still waiting for my copies to come in..

---

----------------------------------------------------------------------------------------------------------------------------------------------------------------

OrbitalGT95

#13

-Coomer+Oct 17, 2005 - 5:01 AM

QUOTE(Coomer @ Oct 17, 2005 - 5:01 AM)

-defgeph+Oct 16, 2005 - 9:55 PM

QUOTE(defgeph @ Oct 16, 2005 - 9:55 PM)

whats skirts are those ?
[right][snapback]345448[/snapback][/right]

They're the Way-Glide replicas.


[right][snapback]345454[/snapback][/right]

WOW....Coom..that is looking so hott...like wow

---

Now SR powered

Jaws4God

#14

Looking Good!! Keep Us Updated!!!

---

~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207

Coomer

#15

Thanks for the comments and help guys. I fiberglassed a bit near the sideskirts today, show below.



Does anyone know how to remove the rear side windows or door handles?

Attached image(s)

 

---

New Toyota project coming soon...

NEVERSTOP

#16

Looking good man!

---

99 project version 3.0.. hello SEMA 2010 =)

Hanyo

#17

to remove door handles like, you need to un-hook two metal rods that pull the lock/unlock mechnizim, and the other rod that opens the actual door.

After that, there are two bolts ( i think 12mm) on the left and right side of the handle. With the bolts removed, the handle should just push out with some manuvering.

not sure about the side glass, maybe you need to use piano wire? i dont know never done it before..


btw, how much did the side skirts cost? How do they compare to OEM ones?

Coomer

#18

-Hanyo+Oct 17, 2005 - 11:24 PM

QUOTE(Hanyo @ Oct 17, 2005 - 11:24 PM)

to remove door handles like, you need to un-hook two metal rods that pull the lock/unlock mechnizim, and the other rod that opens the actual door.

After that, there are two bolts ( i think 12mm) on the left and right side of the handle. With the bolts removed, the handle should just push out with some manuvering.

not sure about the side glass, maybe you need to use piano wire? i dont know never done it before..


btw, how much did the side skirts cost? How do they compare to OEM ones?
[right][snapback]345872[/snapback][/right]

Cool...thanks for the info. >>

The sides and rear extensions costed me $300 I think. They fit like crap compared to OEM sides, and they're fiberglass and not polyurethane. But they're lower and much more aggressive, and flow well with the extensions.

---

New Toyota project coming soon...

celicaracer18

#19

the info on the door handles is right, as far as the rear side glass, it is sealed to the car, and the only way i have found to remove it is to break it, it is also sealed to the molding that goes around it, i was trying to just take off the molding and i was going to try to buffer the glass clear again, but it ended up craking and i have no choice but to replace them now, i am going to try and put plexi glass in first though because it is much much cheaper, so we will see how it turns out

---

My RX8 2JZ Swap ThreadLink to PicsStatusLow.com,Store,Facebook

ghostdog

#20

looks good coomer. re: removing the rear windows, there was a recent topic on it

http://www.6gc.net/forums/index.php?showto...9493&hl=windows

>>