DJWashington

#1

I've got my clutch out and im replacing it. My question is do the pressure plate bolts have to be tourqed to spec? I think they do. Or can i just tighten them down firmly and get away with it?

---

1994 GT Awaiting new tranny......I love my girlfriend...

Supersprynt

#2

Torque them.

---

MyFlickrMyeBay_Perpetual Aperture_

Bigmeanbulldog55

#3

Sometimes auto parts stores will allow you to rent torque wrenches or other tools, if that's why your questioning torquing them.

---

Live Free, Be Happy

Supersprynt

#4

Seriously they arent that expensive just invest in one and have it done right.

---

MyFlickrMyeBay_Perpetual Aperture_

95CelicaST

#5

Be sure you know torque specs...

---

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket

DJWashington

#6

Its 14 pnds i belive. I guess ill go rent one. Thanks guys

---

1994 GT Awaiting new tranny......I love my girlfriend...

nik

#7

i fear for noobs sometimes go by what the manual says

This post has been edited by nik: Nov 17, 2005 - 4:54 PM

---

yea your 3sgte is cool but ill stick to my 7agte

Celicav

#8

Just Torque it, baby!

lagos

#9

>

QUOTE(DJWashington @ Nov 17, 2005 - 4:42 PM) [snapback]356713[/snapback]

>
Its 14 pnds i belive. I guess ill go rent one. Thanks guys

only if you want it to fall off. i think your thinking of the pressure plate torque. the flywheel bolts are 65lb each and they recomend you use locktite on them too.

doubble check everything before do get into it

This post has been edited by lagos: Nov 19, 2005 - 12:22 AM

---

15PSI - 30MPG - Megasquirt Tuned

DJWashington

#10

I am talking about the pressure plate bolts. The flywheel has'nt been taken off.

---

1994 GT Awaiting new tranny......I love my girlfriend...