I spent all day installing my car alarm and it's still not completely done. Most of the morning involved taking the front fender off so I could bury the siren and run the wires into the interior. All I have left is to wire in the trigger to set it off when the doors or liftback are opened. From everything I can see in the wiring diagrams and in the paperwork that came with my alarm it should be a red/white wire at the fuse panel. I found a connector under the fuse panel with a red/white wire on it, unplugged it, the dome light went off. Must be the one right? When I cut the red/white wire going to that connector and plugged it back in the dome light still came on.

Anybody know off hand if I got the right wire?

The alarm came from Crutchfield, it's the 533i. It has a lot of nice features: keyless entry, locks the doors when you turn the key, unlocks when you stop. It is able to pop the trunk but I need some sort of solenoid to make it work. Has anyone done this and can you tell me how to do it?

Thanks

check here
http://www.6gc.net/forums/index.php?showtopic=16174
and here
http://www.6gc.net/forums/index.php?act=ST&f=7&t=11174&st=0

>

Thanks, now I remember seeing those threads before. I just need to find where I saw how to wire the trunk popper

they are all at the top of the interior forum in the sticky

http://www.6gc.net/forums/index.php?showtopic=27828

I did the trunk popper how-to, any questions just ask

>

I had the wrong red/white wire for the trigger (there's like five under there). Got the right one now, everything is working great.

Where did you get your solenoid? I'm assuming a door lock actuator will work for this. I'll just set it up to pull in one direction only though.