has any body bought a 7afe or 4afe Exhaust Manifold from shrk2thgrl on ebay? if so how is it. and dose it all fit?
Exhaust Manifold on ebay - 6G Celicas Forums
i have a setup like that and really its sort of a hassle to get it all to fit, especially with the oil filter (you need to relocate it). it makes for a pretty clean install but its more difficult to install and to work on than a manifold that mounts the turbo higher up.
so the one you have you bought it from that guy? so that manifold has two extra holes? hows the clearance between the turbo and radiator?
Im not sure if theres any alternative, but I do know the logg style isnt the best....
>
I didn't get mine from that guy, it's just the same style. I think the two other holes are probably the bolt pattern for a 4afe, in anycase you wouldn't use them. For me I have about 2 inches before the radiator, with the right fan taken out (you don't really need it).
QUOTE(southwest2118 @ Jan 16, 2006 - 9:44 PM) [snapback]379717[/snapback]
>
so the one you have you bought it from that guy? so that manifold has two extra holes? hows the clearance between the turbo and radiator?
so the one you have you bought it from that guy? so that manifold has two extra holes? hows the clearance between the turbo and radiator?
I didn't get mine from that guy, it's just the same style. I think the two other holes are probably the bolt pattern for a 4afe, in anycase you wouldn't use them. For me I have about 2 inches before the radiator, with the right fan taken out (you don't really need it).
>
i live in texas and it gets pretty hot here. in traffic or with the ac on i can hear the fan coming on to cool the engine. You don't think that will over heat my car?
This post has been edited by southwest2118: Jan 17, 2006 - 7:43 AM
QUOTE
>I didn't get mine from that guy, it's just the same style. I think the two other holes are probably the bolt pattern for a 4afe, in anycase you wouldn't use them. For me I have about 2 inches before the radiator, with the right fan taken out (you don't really need it).
i live in texas and it gets pretty hot here. in traffic or with the ac on i can hear the fan coming on to cool the engine. You don't think that will over heat my car?
This post has been edited by southwest2118: Jan 17, 2006 - 7:43 AM
if your looking for a manifold solution for the 7afTe then i could also suggest a HONDA B16 turbo manifold
you would need to cut off the flange and weld on the 7afe flange to make it work but it does work.....
you would need to cut off the flange and weld on the 7afe flange to make it work but it does work.....
>
Well you still have the other fan; your thermostat should regulate engine temp fine. if you are worried about it you could get an aftermarket radiator thats a bit thinner.
QUOTE(southwest2118 @ Jan 17, 2006 - 4:42 AM) [snapback]379772[/snapback]
>
>
i live in texas and it gets pretty hot here. in traffic or with the ac on i can hear the fan coming on to cool the engine. You don't think that will over heat my car?
>
QUOTE
>I didn't get mine from that guy, it's just the same style. I think the two other holes are probably the bolt pattern for a 4afe, in anycase you wouldn't use them. For me I have about 2 inches before the radiator, with the right fan taken out (you don't really need it).
i live in texas and it gets pretty hot here. in traffic or with the ac on i can hear the fan coming on to cool the engine. You don't think that will over heat my car?
Well you still have the other fan; your thermostat should regulate engine temp fine. if you are worried about it you could get an aftermarket radiator thats a bit thinner.
I'll see how temps are.
playr158
so i would have to buy a 75$ flange? do you know any where i can get it cheaper?
This post has been edited by southwest2118: Jan 17, 2006 - 7:20 PM
playr158
so i would have to buy a 75$ flange? do you know any where i can get it cheaper?
This post has been edited by southwest2118: Jan 17, 2006 - 7:20 PM
nope just jgstools.com/turbo
ya they want $75 or was i looking at the wrong thing?
yup, ur lookin at the right thing 
the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.