Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #33326

How to mount TRD rear bumper extensions ?? - 6G Celicas Forums

Topic #33326 12 posts Started by Mug71
Mug71
#1
Hi there !

I ve purchased 2 TRD rear bumper extensions from chrisc on ebay, but i m a bit annoyed with the mounting method.

The wheel side of the extension is just screwed in place of the mudflap with 2 removed screw, but there is a hole on the bottom of them, located under a screw of the rear bumper, and i don t know what to do with it ... Does the extension is only fixed to the car with the 2 "wheel side" screws or there is something else to mount it ? Cause if i only use the 2 screws, the extension doesn t fit correctly the rear bumper and doesn t stick the rear fender.

Does someone can send me some pics of these extensions mounted on the car, or try to explain me how can i mount them correctly ?

Best regards, Mug

PS: excuse my poor english, i m french wink.gif
beastman
#2
I believe (someone correct me if im wrong) that you need to go to a body shop and they use some high quality glue that will seal the back end on... I have them sitting in my room right now and know what you are talking about. It cannot be held on by only those 2 screws..
Former Celica Owner... RIP 08-2007Now proud owner of a 2007 Solara w/ TRD exhaust, TRD FTSB, TRD Lowering Springs & many other goodies...
Mug71
#3
Damn, i feel much better now that i know i m not the only one having this problem ^^

I ve send a PM to chrisc asking him how to mount it correctly, but i don t have answer yet.
celica3sgte
#4
I just talked to someone that put them on. You will use 2 screws on the inner fender, and double sided tape for hte rest. I'm pretty sure that's how everyone did it and that's how I'll be doing it.
anubis0108
#5
im looking to buy em i wnet on ebay but didnt see any for sell do you guys know who i can contat to get some?
I gotz 2 things my celi and a dream, the prob is commin up with the thrid one...
CelicaZR
#6
PM him on here.
Username Chrisc wink.gif
98 ST204 ZR - Black Beauty - Roaming the streets of Sydney73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser75 TA22 LT - Snow White - Mint Classic Weekend Cruiser77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser94 MX-5 NA8 Clubman - Red Racer - Looking for cornersWIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona86 Corona RT142 - Daily Driver6GC 4 Life Baby!!!
Mr_E
#7
>
QUOTE(celica3sgte @ Feb 1, 2006 - 7:07 PM) [snapback]387584[/snapback]
> I just talked to someone that put them on. You will use 2 screws on the inner fender, and double sided tape for hte rest. I'm pretty sure that's how everyone did it and that's how I'll be doing it.


Worked for me.
JDM ST205Blitz Spec NUR Exhaust, somewhere over $1000Needing another one 18000 miles later, bloody annoying.
anubis0108
#8
>
QUOTE(CelicaZR @ Feb 1, 2006 - 4:57 PM) [snapback]387651[/snapback]
>
PM him on here.
Username Chrisc wink.gif



cool man thanx for ta help im confused i thought chrisc was christian coomer the owner of this site.
I gotz 2 things my celi and a dream, the prob is commin up with the thrid one...
boosted_K2
#9
others use a silicone sealant on the backside of the extension, press it on there real hard and prop it to stay.
Believer, you'll leave her, in leaving them allNo but I don't buy itLike anything you do, as anyone you areCause I'm...Ten Speed, of God's Blood & Burial
creis
#10
can use 3M automotive dubble sided tape. works prefect and its not permanint, can be removed without damage to the paint.
bloodrain
#11
i used screws and bondo, holds like a charm
To live, is to sufferTo survive, thats to find meaning, in the suffering....
anubis0108
#12
>
QUOTE(bloodrain @ Feb 2, 2006 - 9:20 PM) [snapback]388285[/snapback]
>
i used screws and bondo, holds like a charm



lol thatz what im oging to use if i can just get my ands on some lol
I gotz 2 things my celi and a dream, the prob is commin up with the thrid one...
← Back to Topics