Over 1M Posts • 84K Topics • 9K Authors

Home > Topic #34479

Anybody done a powersteering pump? - 6G Celicas Forums

Topic #34479 4 posts Started by madmods
madmods
#1
Anybody done a power steering pump? I got to tackle one, and a clutch and radiator so the camera will
be out for a how to. Any tips on the power steering pump? Is it an o-ring or gasket behind it?
Hanyo
#2
what do you mean done a power steering bump?
like remove and install?

i believe its just pressure fitting on there that holds the line to the pump, either that or a copper washer/gasket.
madmods
#3
>
QUOTE(Hanyo @ Mar 4, 2006 - 9:23 AM) [snapback]402512[/snapback]
>
what do you mean done a power steering bump?
like remove and install?

i believe its just pressure fitting on there that holds the line to the pump, either that or a copper washer/gasket.

Yea, I am going to replace it with a new one. I was wondering what I have to remove to get to it.
Dr_Tweak
#4
Yeah it's not too bad, disconnect the lines and let it drain, then get up in there with a wrench and unbolt it... it's only like two bolts, but they're hard to get to. Have fun smile.gif

And make sure the car is securely on jackstands! biggrin.gif

-doc
-Dr Tweak, 6GC's resident engine swap wiring expert extraordinaireClick here to see my swapsdrtweak@phoenixtuning.com
← Back to Topics