Does anyone know the part numbers for the bigger brakes that have "Celica" embossed on them. Im pretty sure they came on 6th gen GT-4's. Are they available from dealerships, etc? Also, can you swap the normal calipers for those?
"Celica" Calipers - 6G Celicas Forums
the gt4 brakes are much large, you would need to do a complete swap suspension swap (if im not mistaken) to get the gt4 brakes and calipers to fit.
To live, is to sufferTo survive, thats to find meaning, in the suffering....
They arent bolt on for the MacPherson suspension you need the SuperStrut suspension. Your SOL.
MyFlickrMyeBay_Perpetual Aperture_
As above, these brakes (pictured here on my car 
) aren't a straightforward 'bolt on' job to the other 6GCs.
Gary
This post has been edited by GT4WRC: Mar 15, 2006 - 7:08 PM
) aren't a straightforward 'bolt on' job to the other 6GCs.Gary
This post has been edited by GT4WRC: Mar 15, 2006 - 7:08 PM
1994 ST205 Celica GT-FOUR Group A WRC - running in new engine1993 Rover 220 GTi tarmac rally car (under construction) 3SGE power here we come....GT-Four spec list
will the gt4 brakes work with tein ss coilovers
>
Nope. The Tein SS coilovers just replace the strut and spring in the Macpherson suspension setup. It's still a Macpherson setup with Tein SS coilovers.
QUOTE(BLACKcelicaGT @ Mar 15, 2006 - 3:45 PM) [snapback]408159[/snapback]
>
will the gt4 brakes work with tein ss coilovers
will the gt4 brakes work with tein ss coilovers
Nope. The Tein SS coilovers just replace the strut and spring in the Macpherson suspension setup. It's still a Macpherson setup with Tein SS coilovers.
New Toyota project coming soon...
I've said before... although these calipers are nice...
4 pots can be found on trucks times thrice.
Same as these, mods are required,
brackets are needed, from the hubs to sit higher.
along with a rotor that can fit the pot's ire.
4 pots can be found on trucks times thrice.
Same as these, mods are required,
brackets are needed, from the hubs to sit higher.
along with a rotor that can fit the pot's ire.
"It's ok to be naked girl... I'm an artist!"1995 AT200 Celica ST:stocked out daily driver...1984 AE86 Corolla GT-SR5:silvertop 20V 4AGE project car jacked up with goodies...1991 SW2x MR2 n/a:bare bones hardtop model soon to be...
For the time, money, and work, you're better off getting a big brake kit with 6 pot calipers and 13" rotors. Sure it's going to cost a bit more, especially since it's real hard to get someone to sell you the suspension off a gt4 without buying the entire front clip. but sticking with the mac suspension and having a big brake kit will give u better stopping power than the gt4 brakes, and probably look better anyway. or maybe im just talking ****. im at work bored. lol.
>
ya, what else is new, lololol j/k man
QUOTE(JoKeRkId613 @ Mar 15, 2006 - 9:30 PM) [snapback]408231[/snapback]
>
...maybe im just talking ****. im at work bored. lol.
...maybe im just talking ****. im at work bored. lol.
ya, what else is new, lololol j/k man
To live, is to sufferTo survive, thats to find meaning, in the suffering....
>
QUOTE(bloodrain @ Mar 15, 2006 - 8:19 PM) [snapback]408276[/snapback]
>
>
ya, what else is new, lololol j/k man
w.e., mr. im-too-cool-to-go-to-the-celica-meets. jk>
QUOTE(JoKeRkId613 @ Mar 15, 2006 - 9:30 PM) [snapback]408231[/snapback]
>
...maybe im just talking ****. im at work bored. lol.
...maybe im just talking ****. im at work bored. lol.
ya, what else is new, lololol j/k man
>
QUOTE(Kwanza26 @ Mar 16, 2006 - 1:51 AM) [snapback]408205[/snapback]
> I've said before... although these calipers are nice...
4 pots can be found on trucks times thrice.
Same as these, mods are required,
brackets are needed, from the hubs to sit higher.
along with a rotor that can fit the pot's ire.
4 pots can be found on trucks times thrice.
Same as these, mods are required,
brackets are needed, from the hubs to sit higher.
along with a rotor that can fit the pot's ire.
JDM ST205Blitz Spec NUR Exhaust, somewhere over $1000Needing another one 18000 miles later, bloody annoying.
Does anyone have a source for the TRD big brake kit, or have any pictures on our Celicas?
Whoa check it out... I'm pretty sure this is our gen.
http://www.superstreetonline.com/howto/79798/index1.html
some pics:
man those are sexy.
This post has been edited by Chanh55: Mar 21, 2006 - 12:35 PM
Whoa check it out... I'm pretty sure this is our gen.
http://www.superstreetonline.com/howto/79798/index1.html
some pics:
man those are sexy.
This post has been edited by Chanh55: Mar 21, 2006 - 12:35 PM
I have both the Caliper and the rotors of the GT4 (there not on my car yet). It just needs a 3mm spacer between hub and rotor. And a custom bracket is needed to extend the caliper outwards.
Another point since it wont fit all rims because the calipers are HUGE, even the word huge is an understatement
So when i will get my new rims (hopefully within the next 2 weeks) me and someone i met from the Celica Club will put them on my car.
Another point since it wont fit all rims because the calipers are HUGE, even the word huge is an understatement
So when i will get my new rims (hopefully within the next 2 weeks) me and someone i met from the Celica Club will put them on my car.
JDM Powerplant installed, BPU coming very soon!
>
Those are nice indeed. From what I can tell they're for the Gen 7 Celi, but IIRC from what I've seen the front Gen 7 brakes are a direct swap on to the 6GC, making the Gen 7 Big Brake kit a bolt on also???
QUOTE(Chanh55 @ Mar 21, 2006 - 12:32 PM) [snapback]410941[/snapback]
>
Does anyone have a source for the TRD big brake kit, or have any pictures on our Celicas?
Whoa check it out... I'm pretty sure this is our gen.
http://www.superstreetonline.com/howto/79798/index1.html
some pics:
http://superstreetonline.com/howto/p153852_image_large.jpg
http://superstreetonline.com/howto/p153937_image_large.jpg
man those are sexy.
Does anyone have a source for the TRD big brake kit, or have any pictures on our Celicas?
Whoa check it out... I'm pretty sure this is our gen.
http://www.superstreetonline.com/howto/79798/index1.html
some pics:
http://superstreetonline.com/howto/p153852_image_large.jpg
http://superstreetonline.com/howto/p153937_image_large.jpg
man those are sexy.
Those are nice indeed. From what I can tell they're for the Gen 7 Celi, but IIRC from what I've seen the front Gen 7 brakes are a direct swap on to the 6GC, making the Gen 7 Big Brake kit a bolt on also???
>
ToyotaWorld has them for about $2000
QUOTE(Chanh55 @ Mar 21, 2006 - 11:32 AM) [snapback]410941[/snapback]
>
Does anyone have a source for the TRD big brake kit, or have any pictures on our Celicas?
Whoa check it out... I'm pretty sure this is our gen.
http://www.superstreetonline.com/howto/79798/index1.html
some pics:
man those are sexy.
Does anyone have a source for the TRD big brake kit, or have any pictures on our Celicas?
Whoa check it out... I'm pretty sure this is our gen.
http://www.superstreetonline.com/howto/79798/index1.html
some pics:
man those are sexy.
ToyotaWorld has them for about $2000
----------------------------------------------------------------------------------------------------------------------------------------------------------------