Need a little help, I bought a 1996 GT4 and i want to put the SS3 front and rear spliters on the car. But i dont know where to buy them. Can some point me in the right direction?
Thanks
Thanks
SS3 Splitters - 6G Celicas Forums
You might want to check with a member named chrisc. I think he sells replicas of the SS-III front and rear splitters.
New Toyota project coming soon...
>
yup yup.. heres the thread http://www.6gc.net/forums/index.php?showto...27535&hl=chrisc
im gonna get some later
good luck man
QUOTE(Coomer @ Mar 20, 2006 - 4:41 PM) [snapback]410561[/snapback]
>
You might want to check with a member named chrisc. I think he sells replicas of the SS-III front and rear splitters.
You might want to check with a member named chrisc. I think he sells replicas of the SS-III front and rear splitters.
yup yup.. heres the thread http://www.6gc.net/forums/index.php?showto...27535&hl=chrisc
im gonna get some later good luck man
Thanks for the help lads, but i have noticed that his splitters are a little different from the ss-3 splitters. The ss-3's seem to go around the front and rear more.
Any other places to get them or would i be better off going to a toyota parts dealer?
Any other places to get them or would i be better off going to a toyota parts dealer?
do you happen to have a picture as an example? im pretty sure the ones ChrisC sells are direct copies of the ss-3, but perhaps im wrong.
Its Orville's Celica, i just drive it...
SSIII splitters look like this
look at this post
http://www.6gc.net/forums/index.php?showtopic=14675
chrisc sells replicas of SSIII and OEM front and rear splitters
look at this post
http://www.6gc.net/forums/index.php?showtopic=14675
chrisc sells replicas of SSIII and OEM front and rear splitters
my st205 swapandour Beams swap
>
You must be joking
, I have my splitters from chrisc too... no problem... I you want I'll give you two links. One to original splitters and second to splitters made by chrisc... You'll se that you will not see any difference 
QUOTE(alf15 @ Mar 20, 2006 - 11:02 PM) [snapback]410569[/snapback]
>
Thanks for the help lads, but i have noticed that his splitters are a little different from the ss-3 splitters. The ss-3's seem to go around the front and rear more.
Any other places to get them or would i be better off going to a toyota parts dealer?
Thanks for the help lads, but i have noticed that his splitters are a little different from the ss-3 splitters. The ss-3's seem to go around the front and rear more.
Any other places to get them or would i be better off going to a toyota parts dealer?
You must be joking
, I have my splitters from chrisc too... no problem... I you want I'll give you two links. One to original splitters and second to splitters made by chrisc... You'll se that you will not see any difference
No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________
Oh i see from the pics now why the ss-III splitters go further around the front bumper, i never noticed a there was a difference between the two bumpers.
Thanks for all the help lads...i gonna order a set of splitters soon
Thanks for all the help lads...i gonna order a set of splitters soon
>
anyway if you'll decide to order original SS-III splitters, share with "toyota part numbers" here
QUOTE(alf15 @ Mar 22, 2006 - 1:56 PM) [snapback]411324[/snapback]
>
Oh i see from the pics now why the ss-III splitters go further around the front bumper, i never noticed a there was a difference between the two bumpers.
Thanks for all the help lads...i gonna order a set of splitters soon
Oh i see from the pics now why the ss-III splitters go further around the front bumper, i never noticed a there was a difference between the two bumpers.
Thanks for all the help lads...i gonna order a set of splitters soon
anyway if you'll decide to order original SS-III splitters, share with "toyota part numbers" here
No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________
>
XX for paint code (A0=White, C0=Black, etc. )
Front RH Splitter
76851-20060-XX
Front LH Splitter
76852-20050-XX
Rear RH Splitter
76893-20130-XX
Rear LH Splitter
76894-20110XX
QUOTE(malpaso @ Mar 22, 2006 - 7:22 AM) [snapback]411331[/snapback]
>
>
anyway if you'll decide to order original SS-III splitters, share with "toyota part numbers" here
>
QUOTE(alf15 @ Mar 22, 2006 - 1:56 PM) [snapback]411324[/snapback]
>
Oh i see from the pics now why the ss-III splitters go further around the front bumper, i never noticed a there was a difference between the two bumpers.
Thanks for all the help lads...i gonna order a set of splitters soon
Oh i see from the pics now why the ss-III splitters go further around the front bumper, i never noticed a there was a difference between the two bumpers.
Thanks for all the help lads...i gonna order a set of splitters soon
anyway if you'll decide to order original SS-III splitters, share with "toyota part numbers" here XX for paint code (A0=White, C0=Black, etc. )
Front RH Splitter
76851-20060-XX
Front LH Splitter
76852-20050-XX
Rear RH Splitter
76893-20130-XX
Rear LH Splitter
76894-20110XX
----------------------------------------------------------------------------------------------------------------------------------------------------------------
where do you get those diagrams azian? good stuff
^^ i have the toyota euro and jdm epc catalog on my pc.. it's got like all the part numbers and diagrams of every single toyota upto 2002. ..... very useful
----------------------------------------------------------------------------------------------------------------------------------------------------------------
>
nice, where did you get it?
QUOTE(azian_advanced @ Mar 24, 2006 - 5:18 PM) [snapback]412729[/snapback]
>
^^ i have the toyota euro and jdm epc catalog on my pc.. it's got like all the part numbers and diagrams of every single toyota upto 2002. ..... very useful
^^ i have the toyota euro and jdm epc catalog on my pc.. it's got like all the part numbers and diagrams of every single toyota upto 2002. ..... very useful
nice, where did you get it?
rascaca sold it to me
----------------------------------------------------------------------------------------------------------------------------------------------------------------
hey azian...you don't happen to have the part # for the trd rear extensions do you???
actually here's what i noticed... optional exterior parts are not in my epc (or maybe i just can't find 'em). the only parts i've found were parts that come stock on them..
i believe OEM (TRD) front, sides, and rear splitters were options as well as the front lip that doggy has in another thread. so unfortunately, i don't have the part numbers for the TRD-style splitters.
i believe OEM (TRD) front, sides, and rear splitters were options as well as the front lip that doggy has in another thread. so unfortunately, i don't have the part numbers for the TRD-style splitters.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
I was thinking of buying some of thoose for my car.
do they just use the original screw holes in the bumper, or do you gotta make new ones?
Will it look strange with just the front and rear extensions without the sideskirts?
do they just use the original screw holes in the bumper, or do you gotta make new ones?
Will it look strange with just the front and rear extensions without the sideskirts?
They use the original screw holes in the bumper! It will look a bit strange but why don't you get and the sideskirts?
Face your fears, Live your dreams!!!
Money money money, must be funny.
hehe, how much would It roughly cost for front, rear splitters and skirts?
think I should maybe lower it first though. havent seen one with splitters and skirts without suspension drop.
hehe, how much would It roughly cost for front, rear splitters and skirts?
think I should maybe lower it first though. havent seen one with splitters and skirts without suspension drop.
Im actually looking for some oem front and rear bumper extensions. who can i buy them from?
>
I have splitters, skirts, and rear extensions without a drop, you can check the pics in my profile. It looks lower than stock.
QUOTE(Valcor @ Oct 18, 2007 - 7:27 AM) [snapback]606079[/snapback]
>
Money money money, must be funny.
hehe, how much would It roughly cost for front, rear splitters and skirts?
think I should maybe lower it first though. havent seen one with splitters and skirts without suspension drop.
Money money money, must be funny.
hehe, how much would It roughly cost for front, rear splitters and skirts?
think I should maybe lower it first though. havent seen one with splitters and skirts without suspension drop.
I have splitters, skirts, and rear extensions without a drop, you can check the pics in my profile. It looks lower than stock.
We shall show mercy, but we shall not ask for it.
>
hi therte. Can i have a copy please?
QUOTE(azian_advanced @ Mar 24, 2006 - 11:18 PM) [snapback]412729[/snapback]
>
^^ i have the toyota euro and jdm epc catalog on my pc.. it's got like all the part numbers and diagrams of every single toyota upto 2002. ..... very useful
^^ i have the toyota euro and jdm epc catalog on my pc.. it's got like all the part numbers and diagrams of every single toyota upto 2002. ..... very useful
hi therte. Can i have a copy please?