Over 1M Posts • 84K Topics • 9K Authors

Stuck Idling at 2,000 - 6G Celicas Forums

Topic #35493 11 posts Started by BlackCelicaGT94
I was driving the other day and found myself stuck idling at 2,000 rpm everytime i came to a stop. Any explanations? it did it for about half an hour and then hasnt done it again since.


Thanks in advance for any help!

Cruisin down the street in my Infiniti...always lookin for my next trip to Sin City
Sometimes the vibration from the motor moves the bolts that hold the throttle cable in place on my car. This will cause the idle to sick higher. I stick my foot under the pedal and pull it up and it goes back down to normal. If you can do that, I think that'll be your problem. Otherwise, I could be something with the air intake. Have you checked to see if it's clean? Sometimes that can make your idle go a little funny.

Live Free, Be Happy
Could be a vacuum leak, get some carb cleaner and spray it around your intake, if your idle suddenly goes up then that's your leak.

-Doc

-Dr Tweak, 6GC's resident engine swap wiring expert extraordinaireClick here to see my swapsdrtweak@phoenixtuning.com
>
QUOTE(Dr_Tweak @ Mar 29, 2006 - 8:11 AM) [snapback]415018[/snapback]
>
Could be a vacuum leak, get some carb cleaner and spray it around your intake, if your idle suddenly goes up then that's your leak.

-Doc


What he said. Another thought would be a sticky IAC.
>
QUOTE(Fastbird @ Mar 29, 2006 - 8:58 AM) [snapback]415029[/snapback]
>
>
QUOTE(Dr_Tweak @ Mar 29, 2006 - 8:11 AM) [snapback]415018[/snapback]
>
Could be a vacuum leak, get some carb cleaner and spray it around your intake, if your idle suddenly goes up then that's your leak.

-Doc


What he said. Another thought would be a sticky IAC.


well if its sticky thats why tweak recommended carb cleaner to clean it, that IAC is about 180-200+, not a cheap part for a little piece, so try carb cleaner for a buck.
>
QUOTE(LewFX @ Mar 29, 2006 - 10:25 AM) [snapback]415056[/snapback]
>
>
QUOTE(Fastbird @ Mar 29, 2006 - 8:58 AM) [snapback]415029[/snapback]
>
>
QUOTE(Dr_Tweak @ Mar 29, 2006 - 8:11 AM) [snapback]415018[/snapback]
>
Could be a vacuum leak, get some carb cleaner and spray it around your intake, if your idle suddenly goes up then that's your leak.

-Doc


What he said. Another thought would be a sticky IAC.


well if its sticky thats why tweak recommended carb cleaner to clean it, that IAC is about 180-200+, not a cheap part for a little piece, so try carb cleaner for a buck.


No, Dr. Tweak recommended spraying carb cleaner around the intake because as soon as it hits the vacuum leak it will get into the combustion process and make the idle jump. If no vacuum leaks are found, my recommendation would be to take the IAC off and clean it with a carb cleaner. Just spraying around the intake isn't going to affect the IAC at all unless you spray it directly into the IAC intake passage.
>
QUOTE(Fastbird @ Mar 29, 2006 - 10:56 AM) [snapback]415073[/snapback]
>
>
QUOTE(LewFX @ Mar 29, 2006 - 10:25 AM) [snapback]415056[/snapback]
>
>
QUOTE(Fastbird @ Mar 29, 2006 - 8:58 AM) [snapback]415029[/snapback]
>
>
QUOTE(Dr_Tweak @ Mar 29, 2006 - 8:11 AM) [snapback]415018[/snapback]
>
Could be a vacuum leak, get some carb cleaner and spray it around your intake, if your idle suddenly goes up then that's your leak.

-Doc


What he said. Another thought would be a sticky IAC.


well if its sticky thats why tweak recommended carb cleaner to clean it, that IAC is about 180-200+, not a cheap part for a little piece, so try carb cleaner for a buck.


No, Dr. Tweak recommended spraying carb cleaner around the intake because as soon as it hits the vacuum leak it will get into the combustion process and make the idle jump. If no vacuum leaks are found, my recommendation would be to take the IAC off and clean it with a carb cleaner. Just spraying around the intake isn't going to affect the IAC at all unless you spray it directly into the IAC intake passage.

agreed

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
Or use propane / map gas (soldering torch). Same situation as the carb cleaner.

ScottWest Michigan
>
QUOTE(scothaniel @ Mar 29, 2006 - 2:51 PM) [snapback]415188[/snapback]
>
Or use propane / map gas (soldering torch). Same situation as the carb cleaner.



biggrin.gif THAT could be fun. laugh.gif
No really! It works great. I use it all the time looking for exhaust leaking in IC piping. No mess and not harmful to rubber seals.

ScottWest Michigan
scothaniel, I wasn't making fun of you. The thought of a large bottle of propane, an uncontrolled propane release, and engine combustion immediately jumped into my head when I saw that you mentioned it.