doGGy

#1

This is the 3 attemt to build the pods for the celica... Had this idea floating around long enouth till SnapshotGT came and kicked me Well - had to give it a try.. This is the center dash pod, exactly this one in pics is still a prototipe - and there are few minor issues with it - so the second one im building will have everything fixed. This one sits a bit too low, and gauges arent directed towards the driver as much as i wanted. The new one will have the Clock visibility issue fixed, and aimed more at the driver + gauges will sit a bit more higher. Looks will be the same. This one will be for 52mm gauges.

Here are few pics - let me know what you guys think about this.













Its sits flush on the dash, just what in these pics i didnt wanted to glue it totaly, so i used only one strip of the double side tape..

And dont ask about the Triple A-pillar what you can see in these pics - i will write about it later once i will finish with it totaly. this one what is visible in pics was made for a client (my ex celica owner) and i will see if it will be posible to get it in prduction.





Romas

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

JFrost9

#2

That is one of the coolest things ive seen, i like that waaay better then the side pillar guages. I think once you get them the way you want them they'r going to be perfect. The one thing id worry about is how permanent are they? How do the wires get down where they need to be?

---

I am now a part of the ihavemorethen16gc club!

doGGy

#3

>

QUOTE(JFrost9 @ Apr 6, 2006 - 9:44 AM) [snapback]418439[/snapback]

>
That is one of the coolest things ive seen, i like that waaay better then the side pillar guages. I think once you get them the way you want them they'r going to be perfect. The one thing id worry about is how permanent are they? How do the wires get down where they need to be?

All the wires goes between center dash plastic and dash, i made the pod what way - that i will cover the top piece of the center plastic , so you can just put the wires there , cuz there is enouth room to get them in thi place + the pod cover them totaly.

I will be installing this prototipe tomorow to a cliens GT4, will get pics of how everything goes, and where i put the wiring and etc.

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

snapshotgt

#4

My hero

...you have a pm

~snap

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

brianforster

#5

i really like the concept but id like to see pics of it fully glued down, seems like it might look a little "rubbermade" since the edges stick out like a sore thumb.

cant wait to see the final product, im sure it will look great

Fastbird

#6

I love it......I think the final product is going to be incredible. 1st in line.

snapshotgt

#7

>

QUOTE(Fastbird @ Apr 6, 2006 - 1:33 PM) [snapback]418474[/snapback]

>
I love it......I think the final product is going to be incredible. 1st in line.

Your 2nd in line ...don't forget, i'm the one that "kicked" him, as doGGy said

Romas, when do you think these will be produced and ready to ship? I pmed you

~snap

This post has been edited by snapshotgt: Apr 6, 2006 - 1:58 PM

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

TheStreetzKing

#8

nvm..

looks good

This post has been edited by TheStreetzKing: Apr 6, 2006 - 2:35 PM

95CelicaST

#9

That looks hot. I want it! Good work Romas. You are my hero!

edit: you would be my bestest friend if you could make a spot in the shifter surround for a SAFC...

This post has been edited by 95CelicaST: Apr 6, 2006 - 2:47 PM

---

1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of moneyI'm not really an asshole, but I play one on the internet.**** Photobucket

eggman40

#10

Man that looks real good! Id like one if you decided to put them up for sale.

celiracer

#11

I'd like the pillar thats looks NICE

spke719

#12

dude i want those so bad, the one on the dash and if you know about the shifter pods let me know. i think all the pods i use are 2inch. thanks man. oh and the center dash trim where the radio is. ive been lookin for this for a long time. but thanks man.

This post has been edited by spke719: Apr 6, 2006 - 4:48 PM

---

[font=Comic Sans Ms][size=3]SI VIS PACEM PARA BELLUM (if you wish for peace, prepare for war!)

Fastbird

#13

>

QUOTE(snapshotgt @ Apr 6, 2006 - 2:55 PM) [snapback]418480[/snapback]

>
>

QUOTE(Fastbird @ Apr 6, 2006 - 1:33 PM) [snapback]418474[/snapback]

>
I love it......I think the final product is going to be incredible. 1st in line.

Your 2nd in line ...don't forget, i'm the one that "kicked" him, as doGGy said

Romas, when do you think these will be produced and ready to ship? I pmed you

~snap

Hmmph! Fine. Second in line. If these are going to be available within the next few weeks though, I've got a BIG decision to make. Go with the center mount or pillar mount for the Auto Meter Nexus Gauges I've got sitting here for Dr Tweak to put in with the new motor.

presure2

#14

i like that doggy, hmmmm =)

---

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered

x_itchy_b_x

#15

amazing! awesome looks great.

---

Visit My Automotive & Tech Blog.

jdg371

#16

The pod looks great.. would the gauges end up tilted somewhat up.. to have a better view for the driver?? and are they visible outside from normal driving?? for those who want to keep theirs "sleeper"

Good Job!

massbrandon

#17

dang those are sick. i want one whenever theyre ready

This post has been edited by massbrandon: Apr 6, 2006 - 7:57 PM

JFrost9

#18

>

QUOTE(jdg371 @ Apr 6, 2006 - 7:48 PM) [snapback]418589[/snapback]

>
The pod looks great.. would the gauges end up tilted somewhat up.. to have a better view for the driver?? and are they visible outside from normal driving?? for those who want to keep theirs "sleeper"

Good Job!

He said that they will be adjusted in his post. And theres a good chance that no matter where you put 3 guages they wont be too hidden very well unless they are down in the center part of the car.

---

I am now a part of the ihavemorethen16gc club!

Valo666

#19

3rd in line. That is awsome Romas. I liked the shifter idea, but i think this is a bit more pracitcal. for mounting though, can you screw this to the dash? or is it more glueing. Also, would the gaudges need to be held in with the attachment they come with? or are they pressure fitted??

doGGy

#20

>

QUOTE(Valo666 @ Apr 6, 2006 - 8:30 PM) [snapback]418656[/snapback]

>
3rd in line. That is awsome Romas. I liked the shifter idea, but i think this is a bit more pracitcal. for mounting though, can you screw this to the dash? or is it more glueing. Also, would the gaudges need to be held in with the attachment they come with? or are they pressure fitted??

Gauges are press fited in it using some bouble tape or just snug fit Pod itself is hold in place by double side gluing take (like 3M and etc).

---

Ex celica owner - just a guy from other side of the pond...Full custom Projects from restoration to performance builds<<<<<< DCw / JDMart >>>>>>>

DeW_H0e_GT

#21

really cool..i luv it..lemme kno when productions a get-go....

Batman722

#22

count me in Romas for the dash mounted pod....

---

my st205 swapandour Beams swap

CelicaZR

#23

I hope your making RHD version of these
I'm down for all three shifter, centre and pillar

---

98 ST204 ZR - Black Beauty - Roaming the streets of Sydney73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser75 TA22 LT - Snow White - Mint Classic Weekend Cruiser77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser94 MX-5 NA8 Clubman - Red Racer - Looking for cornersWIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona86 Corona RT142 - Daily Driver6GC 4 Life Baby!!!

snapshotgt

#24

>

QUOTE(CelicaZR @ Apr 7, 2006 - 9:45 AM) [snapback]418791[/snapback]

>
I hope your making RHD version of these
I'm down for all three shifter, centre and pillar

Man, you got a lot of guages there ...i guess 8 to be exact!

~snap

---

Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJCurrent: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor

hitcachi

#25

Once again excelent work. I smell what you've been cooking and i want your damn recipe! I other words when these get ready for prodution, count me in.

---

Teh Celica sleeps for Winter '06. Suspension overhaul begins........

j0e_p3t

#26

those looks sexy. especially the dash one. if only my car was turboed and fast enough to need all that.

---

ss-iii splitters and 404 skirts areon. which means i need to update my sig.

spke719

#27

yeah im down, for the shifter and the radio consol. i think i need 2 1/16th gauges. but whatever let me know when you get them ready. thanks man

---

[font=Comic Sans Ms][size=3]SI VIS PACEM PARA BELLUM (if you wish for peace, prepare for war!)

Clipsetuner

#28

Looks sweet, Its not for me but a good alternative.

2 in shifter surround
3 underneath the deck
3 on the dash
3 in the pillar

11 gauges...

DTE

---

I am a thief.do not buy anything from me.

dustin15brown

#29

Looks great as usual Romas

dustinkemp

#30

i wanna see it mounted on the dash.

also, is there ne problem seeing the clock or ne of that?