I thought it was my starter, so I swapped it out. I took in my battery and it wasn't holding a charge so I got a new one and it still won't start. What else would cause this? what specific sensors am I looking at?

We need more info... do you hear the starter clicking? have you checked all your plugs? is the motor turning over at all? Have you checked your fuses?

etc...

-Charlie

I haven't checked my fueses gonna check those, and my coil & ignitor, don't know what else it could be

I checked your other thread here:
http://www.celicatech.com/forums/showthrea...1175#post181175

Now that we know it's cranking, can you tell us if you have spark or fuel? Have you checked the trouble codes? If you have both spark and fuel and no codes you'll want to check timing next.

I found out that my efi fuse was blown, hence the reason it wouldn't start, duh!!

I know I overlooked the little thing of just checking my fuses. But when I ran my cel codes it came back with two cel errors. 24 & 32, would they cause me to only be reading 6psi on my boost gauge? And what else would cause this?

Now today, Its only hitting 5psi

24 - AIR Open or short circuit in Air Temp Sensor Check Air Temp Sensor
32 - AFM Open circuit or short in E2 signal Test or replace Air flow Meter

so everyone doesnt have to search

I thought code 31 was for AFM short or open.

>

yea I read it, I'm hoping its not my afm but thats what things are leaning towards, without me checking the voltage I won't know for sure though