hey all,

u guys with the ground control coilovers.....u using the "wrench" that they show in some coilovers applications??

how can u tell from the front springs n rear?.....theres like 2 short springs and 2 long springs.....and the 2 deiffenrent "hat" designs..which goes on what?.....im really confused.....i havent pull apart anything yet..i jus wann arun it by u guys b4 i start takin everything off......

sorry for the quick questions, im lookin at websites n they not tellin jack...i figure i ask u guys...











This post has been edited by DeW_H0e_GT: May 4, 2006 - 11:03 PM

Those coilovers are garbage... I wouldn't install them if I were you. I had them installed on the Celica when I first bought it... ride was horrible, other people that had it installed would say the same thing.

I bet SBCelicaGT will have something different to say...

at the very least, there will be part numbers on each spring, just check them on the net, then you'll know which are front and rear

the taller ones are the rear and shorter ones are front, I do believe

ive tried searching it on google, yahoo...still no answer part numbers:

GC 150.64.66 Short Springs
GC 150.64.53 Tall Springs

also teh "HAT " designs that differs in pairs.....as the ^pic^ indicates.....

plz help

GC 150.64.66 is for the front, which needs the flat-top hat.

GC 150.64.53 is the rear, which needs the cone-top hat.

as far as a wrench goes, mine didn't come with one, and I bought mine brand new. Still waiting to be installed....

Sorry no one really answered your question.

>

THANK YOU SO MUCH!!!!!!!!...ur the best.....its ok that no1 wanna answer...it takes guts...

ive ordered some wrench/o rings/ stickers seeing i bought these used....yup...them stickers can make me bust them 60mph curves..LOLS!!!!

>

Its how I roll.