Anyone know where to get some good polyurithane bushings for a 94 celica st?
Bushings - 6G Celicas Forums
i have the same question, + for gt
*bump*
*bump*
----------------------6GC's FIRST V6----------------------JDM 96 MR2-T Faster - 94 Celica GT 3MZFE Funner - 99 Rav 4 AWD Handy
>
Anyone?
QUOTE(K-ESD @ May 24, 2006 - 12:43 PM) [snapback]437439[/snapback]
>
i have the same question, + for gt
*bump*
i have the same question, + for gt
*bump*
Anyone?
Toyota Celica 2.0GT 1995 - 175BHP- D2Racing coilovers - BlackDiamond brakes - TOYO R881 tires -
Try EnergySuspension.com they have polyurethane bushings
>
not for our cars
QUOTE(AMCMoe @ Jun 29, 2006 - 2:11 PM) [snapback]450386[/snapback]
>
Try EnergySuspension.com they have polyurethane bushings
Try EnergySuspension.com they have polyurethane bushings
not for our cars
----------------------6GC's FIRST V6----------------------JDM 96 MR2-T Faster - 94 Celica GT 3MZFE Funner - 99 Rav 4 AWD Handy
Superflex makes them, but only for the rear.
JDM Powerplant installed, BPU coming very soon!
I was at Aotozone yesterday and I saw that they have a big selection of polyurethane bushings, they look just like the ones that came with my sway bars, so check your local autozone.
This post has been edited by Culpable04: Jun 30, 2006 - 5:09 AM
This post has been edited by Culpable04: Jun 30, 2006 - 5:09 AM
theres different sizes..so whatever bushing u have jus bring it in autozone and jus match em up with the ENERGY SUSPENSION bushings......
btw, superflex has em for the rear???...can you provide website????
This post has been edited by DeW_H0e_GT: Jun 30, 2006 - 8:28 AM
btw, superflex has em for the rear???...can you provide website????
This post has been edited by DeW_H0e_GT: Jun 30, 2006 - 8:28 AM
how many people would be interested in getting together to try and see if a company like energy suspension would make a full set (full car) of Poly bushings for our car....i have pieces of the car i'm willing to send out to have them made if we get enough interest to beable to ask the company of a deal
I'd buy a set if they were available, though I do know that it might take forever to fab bushings. A bunch of MKIII Supra guys were trying to get a set made through Energy Suspension and ultimately ended up going with another company entirely. (Prothane IIRC) At any rate, it can be done, and I hope there is enough interest to get something going.
I would be interested as well. Since Superflex only delivers the rear ones.
JDM Powerplant installed, BPU coming very soon!
if the supra guys ditched that company and went with prothane i guess we should start at prothane
so thats wat
3 interested...we need more
so thats wat
3 interested...we need more
I'm interested. My car realy needs new bushings.
The only difficulty is that I live in Norway.
The only difficulty is that I live in Norway.
Toyota Celica 2.0GT 1995 - 175BHP- D2Racing coilovers - BlackDiamond brakes - TOYO R881 tires -
another member in....
anyone have a guess or estimate on how much these would cost?
i assume it would depend on how many people we could get in on this...
>
Shipping stuff like that would notcause cost more then 50 USD shipped I guess. Im in as well! Someone make a list 
This post has been edited by Kadett: Jul 5, 2006 - 2:41 PM
QUOTE(Speeder @ Jun 30, 2006 - 8:49 PM) [snapback]450818[/snapback]
>
I'm interested. My car realy needs new bushings.
The only difficulty is that I live in Norway.
I'm interested. My car realy needs new bushings.
The only difficulty is that I live in Norway.
Shipping stuff like that would not
This post has been edited by Kadett: Jul 5, 2006 - 2:41 PM
JDM Powerplant installed, BPU coming very soon!
1)SCM
2)kadett
3)playr
4)dewhoe
5)speeder
?
2)kadett
3)playr
4)dewhoe
5)speeder
?
>
Which company did you mean by this reply. Superflex or another one?
Also not unimportant. GT and ST should be the same right?
QUOTE(playr158 @ Jun 30, 2006 - 7:56 PM) [snapback]450805[/snapback]
>
if the supra guys ditched that company and went with prothane i guess we should start at prothane
so thats wat
3 interested...we need more
if the supra guys ditched that company and went with prothane i guess we should start at prothane
so thats wat
3 interested...we need more
Which company did you mean by this reply. Superflex or another one?
Also not unimportant. GT and ST should be the same right?
JDM Powerplant installed, BPU coming very soon!
i ment we'll investigate with PROTHANE on the ability to produce some bushings
and i'm not sure if they are or not
and i'm not sure if they are or not
I would be in
+1
Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
me too
+1
ok seems like some decent interest i'll send out an email shortly
you can count me in too
1: SCM
2: kadett
3: playr
4: dewhoe
5: speeder
6: presure2
7: 96c-oneconv
8: Celicaguy13
9: Tech9ine
10: djspike
11:
2: kadett
3: playr
4: dewhoe
5: speeder
6: presure2
7: 96c-oneconv
8: Celicaguy13
9: Tech9ine
10: djspike
11:
JDM Powerplant installed, BPU coming very soon!
thanks for making up that list for me kadett!
if theres an estimate price I might join in
^^ same here