i am still in!
Bigal
Bigal
1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.
1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.
Feeler GB: Traction Control Bars - 6G Celicas Forums
1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.
my friend just got something similar for his MR2....and now his car is pretty much a straight line ride....my concentration is going to be road coarse....so my question now is will this part be a drag racing piece that will hurt the handling that road coarse requires?
>
This will not effect handling at all. The only thing it will do is keep the tires from toeing in, and thereby being more prone to losing traction, on hard accelleration.
1. Jay
2. Manny
3. Nik
4. Jerry
5. Dan
6. Jeff
7. Al
QUOTE(playr158 @ Jul 11, 2006 - 11:46 AM) [snapback]454565[/snapback]
>
my friend just got something similar for his MR2....and now his car is pretty much a straight line ride....my concentration is going to be road coarse....so my question now is will this part be a drag racing piece that will hurt the handling that road coarse requires?
my friend just got something similar for his MR2....and now his car is pretty much a straight line ride....my concentration is going to be road coarse....so my question now is will this part be a drag racing piece that will hurt the handling that road coarse requires?
This will not effect handling at all. The only thing it will do is keep the tires from toeing in, and thereby being more prone to losing traction, on hard accelleration.
1. Jay
2. Manny
3. Nik
4. Jerry
5. Dan
6. Jeff
7. Al
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
thanks for clearing that up JG 
since there is still some fabrication that needs to be completed upon installation, will the TCB be less expensive?
Bigal
This post has been edited by bigal004321: Jul 12, 2006 - 11:59 AM
Bigal
This post has been edited by bigal004321: Jul 12, 2006 - 11:59 AM
1994 celica GT.....3sgte in a month! all helpers are welcome!!! i live in Plattsburgh, NY.
>
No. The only thing different from the manufacturer's perspective is that the connecting point need not have a hole drilled for a bolt. I doubt that would save them much money.
QUOTE(bigal004321 @ Jul 12, 2006 - 11:58 AM) [snapback]455071[/snapback]
>
since there is still some fabrication that needs to be completed upon installation, will the TCB be less expensive?
Bigal
since there is still some fabrication that needs to be completed upon installation, will the TCB be less expensive?
Bigal
No. The only thing different from the manufacturer's perspective is that the connecting point need not have a hole drilled for a bolt. I doubt that would save them much money.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
I spoke to Carl today about pricing. He needs to price out the component parts and then he will get us a price. He has ALOT of work right now so we may have to wait a bit on this.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
So now that you are selling your celi we can folrget about these TBs ? Or maybe if i get my exhaust done at speedsource and carl will have some free time the production will still be possible ?
QUOTE(tufy @ Jul 19, 2006 - 7:40 AM) [snapback]458074[/snapback]i dont drive fast, i just fly low
>
This is on hold as far as I am concerned. We'll see what happens to my car. Its possible that I might keep it and continue the build including the traction bars. If you are having an exhaust fabbed up by Carl, ask him about it. Good luck Jerry.
QUOTE(CilverSeliST205 @ Aug 3, 2006 - 6:36 PM) [snapback]465084[/snapback]
>
So now that you are selling your celi we can folrget about these TBs ? Or maybe if i get my exhaust done at speedsource and carl will have some free time the production will still be possible ?
So now that you are selling your celi we can folrget about these TBs ? Or maybe if i get my exhaust done at speedsource and carl will have some free time the production will still be possible ?
This is on hold as far as I am concerned. We'll see what happens to my car. Its possible that I might keep it and continue the build including the traction bars. If you are having an exhaust fabbed up by Carl, ask him about it. Good luck Jerry.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
>
Thanks Jay! Im happy to hear that there is still some hope for the celi
This post has been edited by CilverSeliST205: Aug 3, 2006 - 9:30 PM
QUOTE(jgreening @ Aug 3, 2006 - 8:46 PM) [snapback]465114[/snapback]
>
This is on hold as far as I am concerned. We'll see what happens to my car. Its possible that I might keep it and continue the build including the traction bars. If you are having an exhaust fabbed up by Carl, ask him about it. Good luck Jerry.
This is on hold as far as I am concerned. We'll see what happens to my car. Its possible that I might keep it and continue the build including the traction bars. If you are having an exhaust fabbed up by Carl, ask him about it. Good luck Jerry.
Thanks Jay! Im happy to hear that there is still some hope for the celi
This post has been edited by CilverSeliST205: Aug 3, 2006 - 9:30 PM
QUOTE(tufy @ Jul 19, 2006 - 7:40 AM) [snapback]458074[/snapback]i dont drive fast, i just fly low
>
Well, I am not going to give it away. I have two people interested at the moment and one tells me he wants it subject to some issues on his end. We will see.
QUOTE(CilverSeliST205 @ Aug 3, 2006 - 9:30 PM) [snapback]465155[/snapback]
>
>
Thanks Jay! Im happy to hear that there is still some hope for the celi
>
QUOTE(jgreening @ Aug 3, 2006 - 8:46 PM) [snapback]465114[/snapback]
>
This is on hold as far as I am concerned. We'll see what happens to my car. Its possible that I might keep it and continue the build including the traction bars. If you are having an exhaust fabbed up by Carl, ask him about it. Good luck Jerry.
This is on hold as far as I am concerned. We'll see what happens to my car. Its possible that I might keep it and continue the build including the traction bars. If you are having an exhaust fabbed up by Carl, ask him about it. Good luck Jerry.
Thanks Jay! Im happy to hear that there is still some hope for the celi
Well, I am not going to give it away. I have two people interested at the moment and one tells me he wants it subject to some issues on his end. We will see.
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.