i found a rim i like but it has an offset of 48mm if i use a 20mm spacer would that be a bad thing?
wheel spacers - 6G Celicas Forums
>
according to the offset wheel guide a 7" rim should have a total offset of 26 so i figure that a 20mm spacer would be cool. Im just wondering if using that large of a spacer is smart idea
btw the rims i like are here
http://www.discounttiredirect.com/direct/f...5&rw=7&bp=5-100
QUOTE(urbandork @ Jun 19, 2006 - 12:22 AM) [snapback]446074[/snapback]
>
i found a rim i like but it has an offset of 48mm if i use a 20mm spacer would that be a bad thing?
i found a rim i like but it has an offset of 48mm if i use a 20mm spacer would that be a bad thing?
according to the offset wheel guide a 7" rim should have a total offset of 26 so i figure that a 20mm spacer would be cool. Im just wondering if using that large of a spacer is smart idea
btw the rims i like are here
http://www.discounttiredirect.com/direct/f...5&rw=7&bp=5-100
You should be ok as long as you have enough thread left to bolt the wheels on, although 5 stud so should be fairly safe with losing some thread.
anyon have any good suegestions for good companies to go with when looking to buy spacers?
i would only trust H&R spacers.
15PSI - 30MPG - Megasquirt Tuned
>
+1
Having 15mm in front and 20mm in the rear both from H&R. Excellent quality.
QUOTE(lagos @ Jun 19, 2006 - 8:37 PM) [snapback]446313[/snapback]
>
i would only trust H&R spacers.
i would only trust H&R spacers.
+1
Having 15mm in front and 20mm in the rear both from H&R. Excellent quality.
JDM Powerplant installed, BPU coming very soon!
>
That's the problem... rear bolts are 28mm and front bolts 25mm -> You don't have chance use 20mm spacers without:
a) change bolts to longer ones (but how?)
b) use spacers with own bolts like those...
I need figure out the same problem...
QUOTE(vsideboy @ Jun 19, 2006 - 4:55 PM) [snapback]446243[/snapback]
>
You should be ok as long as you have enough thread left to bolt the wheels on, although 5 stud so should be fairly safe with losing some thread.
You should be ok as long as you have enough thread left to bolt the wheels on, although 5 stud so should be fairly safe with losing some thread.
That's the problem... rear bolts are 28mm and front bolts 25mm -> You don't have chance use 20mm spacers without:
a) change bolts to longer ones (but how?)
b) use spacers with own bolts like those...
I need figure out the same problem...
No more replicas... This is evolution... This isSS-four:)________[Featured Celica of 6gc.net @ 2010]_________
H&R DRS series come with new wheelbolt so you have longer bolts. Its the safest way to install the spacers.
JDM Powerplant installed, BPU coming very soon!
I also want spacers, they look pricey but these are the ones I will buy.
H&R DRS 15mm is $120 for the pair
H&R DRS 20mm is $120 for the pair
Should I use 15mm in the front and 20mm in the rear?
H&R DRS 15mm is $120 for the pair
H&R DRS 20mm is $120 for the pair
Should I use 15mm in the front and 20mm in the rear?
'92 Grey Mitsubishi 3000GT SL -Sold'96 Black Celica ST 25th Anniversary -Sold'99 Black Mitsubishi 3000GT VR-4 -Sold'04 E250 Work Van -Going soon'08 Grey Dodge Charger Work Car -Ordered
Dont know what kind of rims you have. Offset and width?!
JDM Powerplant installed, BPU coming very soon!