Over 1M Posts • 84K Topics • 9K Authors

engine angle and mounting height? - 6G Celicas Forums

Topic #38991 6 posts Started by urbandork
I know the 5sfe is tilted but by how much and is the 3sgte tilted by the same amount.

and just for kicks if someone where to put a 5sfe in a gt4 would it be the correct height to mount up to the all wheel drive tranny?
yes, the 3s sits at the same angle.
and yes, i would assume so, however, idk if the 5sfe would have enough HP to power all 4 wheels laugh.gif

Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered
Lol. Power should be enough. Only 0-60 would be like 12-13 seconds or so biggrin.gif

JDM Powerplant installed, BPU coming very soon!
think my 5sfte would be good enough?
>
QUOTE(urbandork @ Jul 7, 2006 - 5:58 PM) [snapback]453150[/snapback]
>
think my 5sfte would be good enough?



sure...enough for an awesome awd 18 sec car!



15PSI - 30MPG - Megasquirt Tuned
>
QUOTE(urbandork @ Jul 7, 2006 - 5:58 PM) [snapback]453150[/snapback]
>
think my 5sfte would be good enough?

not if your goal is for it to actually be fast.
your prolly in the nighborhood of ~180whp, which is basicly what a USDM alltrac had 90-93 stock. the AWD drivetrain really just slows them down more than anything till you start modding them.
IMO its really not worth even thinking about the AWD stuff unless your planning a swap to the 3s along with some SERIOUS mods.


Former Team 5SFTE pro member ;)13.6@108MPH, 5SFTE Powered