I have a small fist sized dent in my drivers side door panel, in the section just above the arm rest. Does anyone know how I can fix this. Or would i just be better of buying a new door panel?

ugh... i'd have to say your best bet is to get a new door panel

If its a push in dent, you could probably just take off the interior trim on the door, then try to get at the dent from the backside......that might get it out for the most part, but if not you'll have to get the new panel. or take it to a body shop and get an estimate, which would might be around 3-4 hundred, maybe.

I posted this in the wrong section. The dent isn't outside the car, but inside of the car. On the vinyl type material. sorry.